DuraVent DirectVent Pro Square Horizontal Termination Cap: a square wall cap for ordinary and high wind sites
The DuraVent DirectVent Pro Square Horizontal Termination Cap is a cap for a vent that exits through an outside wall. It is listed for both sheltered locations and places exposed to high winds. This cap is for horizontal runs only. A vent ending above the roof needs a vertical cap instead. DirectVent Pro is DuraVent’s pipe inside a pipe vent for direct vent gas fireplaces and stoves: exhaust goes out through the inner pipe and outside air comes in through the outer pipe. This cap must be among the choices approved in your appliance’s manual.
Choose your material first: Standard aluminum, stainless steel, or copper. Then select the matching pipe size, either 4 by 6 5/8 inch or 5 by 8 inch. This cap takes the full size wall fittings: the thimble, a sleeve through the wall, the standoff, which spaces the cap away from siding, and the counter flashing, which covers the wall opening. Keep a copper cap from contacting galvanized metal. Prefer a smaller cap with an adjustable air intake? See the DuraVent DirectVent Pro Square Horizontal H2 Termination Cap. The DuraVent DirectVent Pro Square Horizontal Termination Cap ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































