MCO Pools

Who makes MCO Pools?

MCO Pools is our own line of fiberglass pools and inground spas. Every shell is made in León, Guanajuato, Mexico. Each shell comes through our distributor in Rio Medina, Texas. Floors, walls, benches and steps arrive molded in one piece with the color already on. Browse the store's fiberglass pools or explore all our pools and spas.

Pool shells by size and shape

The fiberglass plunge pool measures 9.8 by 20 feet, with a flat floor 5 feet deep and wide entry steps for a small yard or courtyard. The rectangle measures 12 by 25 feet, with a straight swimming run. Compact 12 by 26 foot pools offer soft curved seating or a wave shaped outline with three benches and stair entry.

Among the pool shells on their own, freeform outlines measure 14 feet wide. The 26 foot length suits a shorter yard, while the 28 foot length has a shallow end bench and stairs. At 30 feet long, choose curved seats or three benches, four steps and a round tanning ledge, a shallow shelf for lounging. The long fiberglass swimming pool measures 14 by 35 feet, with a wide tanning ledge, side to side entry steps and depths from 3 feet 6 inches to 6 feet.

Pools with a spa and standalone spa shells

A pool with a spa molded in arrives as one piece. Choose a 14 by 30 foot freeform with a tanning ledge at the shallow end or a 14 by 35 foot pool with the spa alongside. Your builder adds the heater and valves so the hot tub can run warmer.

An inground fiberglass spa is a basin set into the ground. The 7 by 7 foot shell has a bench and three steps, while the shell measuring 8 feet 8 inches by 9 feet 4 inches has seating around the sides. Either rides along in the same load when added to a pool listing.

The three colors

Choose Caribbean Blue for turquoise water or Cancun White for bright, clear water. Eclipse Gray gives slate and teal tones. The color is chosen on the page and molded into the shell before it arrives.

What your pool builder does

Each listing covers the shell only, an inground pool set by your builder. Your pool builder digs the hole and sets the shell with a crane, so yard access needs a clear swing path. The builder adds the pump, filter, heater, coping around the edge and decking, plus spa jets and controls. The finished fiberglass shell is low maintenance once your builder has set it and added the equipment. These pools are for swimming and sitting, not diving. Request a Quote on the listing confirms the figure for your address.

Why buy our own line from My Cozy Outdoors?

Questions about shape, color or what your builder needs go straight to us by phone because we make this line. Each shell carries the MCO limited lifetime warranty. Call us and we will talk it through.

Your questions answered

Where are MCO pools made?

Every shell in our own line is made in León, Guanajuato, Mexico. Each comes through our distributor in Rio Medina, Texas. The floor, walls, benches and steps are molded in one piece with the color already on.

Does the shell come with the pump and filter?

No, each listing is for the shell only. Your builder digs, sets the shell with a crane, and adds the pump, filter, heater, coping and decking. A spa also needs jets and controls. The crane needs a clear swing path.

Can I get a tanning ledge or a spa?

Yes, a tanning ledge is molded into the 14 by 30 foot pool with three benches and the 14 by 35 foot pool. You can choose a hot tub molded into the pool shell. Standalone spa shells can ride along with any pool. No waterfall is part of a shell.

What colors do MCO pools come in?

You can choose Caribbean Blue for turquoise water, Cancun White for bright, clear water, or Eclipse Gray for slate and teal tones. Your color is chosen on the page. It is molded into the shell, so it arrives already on.

What is the warranty on an MCO pool?

Every shell carries the MCO limited lifetime warranty. You can call us with questions about the warranty on the shell you are considering. Call us and we will talk it through with you as you choose your MCO pool.