DuraVent DirectVent Pro Dead Soft Aluminum Flashing: a flexible base for metal or tile roofs
The DuraVent DirectVent Pro Dead Soft Aluminum Flashing is a roof covering for the opening where the vent pipe passes through. It is made for metal or tile roofs, where a stiff base cannot follow the ridges and curves. The soft aluminum base can be shaped to match the roof surface. DirectVent Pro is DuraVent’s pipe inside a pipe vent for direct vent gas fireplaces and stoves: exhaust goes out through the inner pipe and outside air comes in through the outer pipe.
Choose the size that matches your vent: 4 by 6 5/8 inch or 5 by 8 inch. Then choose the style for your roof’s pitch, meaning how steep it is. One covers pitches from flat to 6 in 12. The other covers pitches from 7 in 12 to 12 in 12. The roofing goes over the flashing’s upper edge. A storm collar, a ring around the pipe above the flashing, is required and must be sealed to the pipe with non hardening sealant. Have shingles instead? See the DuraVent DirectVent Pro Adjustable Roof Flashing for shingle roofs. The DuraVent DirectVent Pro Dead Soft Aluminum Flashing ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































