DuraVent PolyPro 8 Inch Fulton EDR 2000 Appliance Adapter: joins an 8 inch vent to the boiler
The DuraVent PolyPro 8 Inch Fulton EDR 2000 Appliance Adapter is the fitting that connects an 8 inch PolyPro vent to the Fulton EDR 2000 boiler’s exhaust outlet. DuraVent makes this part, not Fulton. It comes with hose clamps at both ends, and you do not need a separate adapter connector. Before ordering, check that Fulton’s venting instructions allow PolyPro for your boiler. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters.
The vent itself uses DuraVent PolyPro parts, rather than a mix of pipes or connection methods from different brands. Connections to PVC, another polypropylene system, or metal venting need the adapters DuraVent makes for those connections. If the plastic vent crosses a fire rated wall or floor, that opening needs approved firestopping, a barrier that helps keep fire from spreading through it. Have an EDR 750 to 1500 boiler? See the DuraVent PolyPro 6 Inch Fulton EDR 750 to 1500 Appliance Adapter. The DuraVent PolyPro 8 Inch Fulton EDR 2000 Appliance Adapter ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 8PPS-FULTEDR-8PPF
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
8” | 200mm
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video