DuraVent PolyPro – Flex Adapter Kit

$175.15

✓ Free Shipping
✓ No Sales Tax (except WY)
✓ 100% Price Match Guarantee

DuraVent Logo

DuraVent Logo    Authorized Dealer – Full Warranty Included

Choose a Size *

3” - 3PPS-FAS (+$0)
4” - 4PPS-FAS (+$33.36)
5” - 5PPS-FAS (+$108.37)
Product price: $175.15
Total options:
Order total:
SKU: 3PPS-FAS Categories: , , Brand:

DuraVent PolyPro Flex Adapter Kit: connects both ends of one flex liner to rigid pipe

The DuraVent PolyPro Flex Adapter Kit is a pair of adapters that connects a flexible chimney liner to rigid vent pipe. The male adapter joins rigid pipe to the liner at the bottom of the chimney. The female adapter connects the liner back to rigid pipe at the top. You get both adapters and two flex gaskets, which seal the connections. Choose 3, 4, or 5 inch to match your flex liner. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters.

The liner is trimmed to the needed length on site with a saw or knife, making the cut in a groove. Before ordering, the appliance manufacturer must approve PolyPro Flex for your particular appliance. The system uses only DuraVent terminations, the parts where the vent ends outdoors. An existing chimney must also be inspected and found sound before it serves as the passage for the liner. Need just the bottom connection? See the DuraVent PolyPro Flex Male Adapter, sold separately. The DuraVent PolyPro Flex Adapter Kit ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

Details

SKU: 3PPS-FAS | 4PPS-FAS | 5PPS-FAS

Applications

PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.

Materials and Construction

Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.

Clearances

General:  0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.

Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.

Horizontal Installations:  ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.

Concentric vent system components, including Horizontal and Vertical Terminations:  0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.

Diameters

3” (80mm) | 4” (100mm) | 5” (130mm)

Listings

Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.

Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.

Instructions

Typical Installation

  • Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.

PolyPro Installtion 1
PolyPro Installtion 2
PolyPro Installtion 3
PolyPro Installtion 4

Product Resources

Catalogs

Submittals

Bulletins

Sales Sheets

Spec Sheets

Educational Papers

Videos

Newly Designed PolyPro® Locking Clamps Video

PolyPro® Double-Wall Video

Why Polypropylene? DuraVent’s PolyPro® Venting System Video

FAQ

What is the PolyPro Flex Adapter Kit for?

It contains one male and one female adapter with two flex gaskets, the pair that lets a PolyPro run switch from rigid pipe to flexible liner at the base of a chimney and back to rigid pipe at the top. Choose 3, 4 or 5 inch on the selector to match the flex. It is used with the PolyPro flex lining system.

Do I need this if I bought the Flex Chimney Lining Kit?

Not for a single liner: the lining kit already includes male and female flex adapters. Buy this kit when you need a second pair, for example to join two flex lengths through a rigid section, to replace adapters or gaskets, or when assembling a lining run from individual parts rather than the kit.

How do the adapters seal?

Each adapter carries a flex gasket; the flex pushes onto the adapter over the gasket and is secured with a locking clamp, which DuraVent requires on every exhaust joint. Lubricate gaskets with soapy water only, never petroleum products, and check the gasket sits evenly in its groove before clamping.

Which appliances use PolyPro flex?

Category II and IV condensing gas appliances listed to use PolyPro, such as high-efficiency water heaters, condensing boilers and warm-air furnaces, with exhaust up to 230 F and 15 inches water column. The chimney the flex runs in must not vent any other appliance. The appliance manual sets the maximum vent length.

What clearance applies to the flex and adapters?

Vertical PolyPro, including the double-wall flex, is listed at zero clearance to combustibles up to 230 F; horizontal single-wall pipe needs 1/4 inch above 194 F and must slope back to the appliance 3/8 inch per foot. Lining kits, flex lengths and clamps are in the PolyPro category.

Shipping / Freight / Return Info

Same-Day / 24 hour shipping

Same-Day/24 hour shipping - If we have the product in stock, we can ship same day if ordered before 12pm Monday - Friday (CST).

Freight Claims Policy

Please follow these very important steps when it comes to Freight Items that are damaged or missing
  • Open and inspect the order while the delivery driver is present. If delivery driver does not provide sufficient time to do so, please notate the delivery receipt.
  • By signing the delivery receipt without noting any damage or missing items, you confirm that your order arrived complete and in excellent condition.
  • Record any damage or missing pieces directly on the delivery receipt.
  • Do not discard damaged item(s) or any original packaging. For severe damage, write “Refused due to damage” on the delivery receipt and contact us immediately.
  • Report any damage within two business days, including delivery details and photos showing the issue
  • Damaged item(s) must be returned within 30 days. Failure to return them will result in a charge to the original payment method.

Return Merchandise Authorization Policy

Please follow these very important steps when Returning Items. Contact our team.
  • Submit your return request within 30 days of delivery.
  • You will receive an email within 1-2 business days confirming whether your return request has been approved or denied.
  • Please also note that a 20% restocking fee may apply to approved returns
  • If approved, you will receive an itemized Return Authorization, return shipping labels (if requested), and detailed instructions within 1–2 business days
  • From the date this email is received, you will have 14 days to return the product.
  • Once our distributor receives and inspects the returned item(s), your refund will be issued within 1–2 weeks
  • Items returned outside of this process or time frame are not eligible for a refund.

Customer Reviews

Be the first to review this product

What Our Customers Say

Shop by Best Sellers

Fireplace

Get In Touch

Call or Text us for our Best Price

It's important to us to go above and beyond for our clients and make sure you make the right decision for your home.