DuraVent PolyPro Horizontal Termination for Commercial Systems: ends a larger PolyPro vent through a wall
The DuraVent PolyPro Horizontal Termination for Commercial Systems is a stainless steel fitting that ends the vent through a wall. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters. This termination includes a 23 degree elbow with a built in screen to keep birds out. Wall plates for both sides of the wall and a clamp to connect it to PolyPro pipe also come with it. Every piece is stainless steel. Choose a 5, 6, or 8 inch size on this page to match the vent.
Straight PolyPro pipe can be shortened with a hacksaw, leaving a square cut with the rough edges removed. Cutting removes the clamp tab, so that joint needs a locking clamp or locking band clamp without puncturing the pipe wall. Gray PolyPro plastic parts belong indoors. Plastic parts exposed to sunlight outside must be the black UV resistant versions. Going through the roof instead? See the DuraVent PolyPro Vertical Termination for Commercial Systems roof fitting. The DuraVent PolyPro Horizontal Termination for Commercial Systems ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 4PPS-HSTL(rate not available in the price list) | 5PPS-HSTL | 6PPS-HSTL | 8PPS-HSTL
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
5” (130mm) | 6” (150mm) | 8” (200mm)
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video