DuraVent DuraPlus DSA Roof Flashings: soft aluminum for metal or tile roofs
The DuraVent DuraPlus DSA Roof Flashings is a flashing that seals around the chimney at a metal or tile roof. DSA means dead soft aluminum. You can shape it by hand around metal ribs or tile curves where stiff galvalume cannot seal. DuraPlus is DuraVent’s triple wall chimney, the insulated pipe that takes over from the stovepipe at the ceiling or wall and runs up past the roof. With the proper shields and straps, the chimney can stay exposed in an attic or along an outside wall. It can also sit inside a chase, a framed enclosure, but framing must not touch the chimney.
Choose the 6 or 8 inch size, then select your roof pitch range: 0/12 to 6/12 or 7/12 to 12/12. Pitch measures inches of rise over 12 inches of horizontal run. A separate storm collar fits above the flashing and is sold separately. When totaling your chimney length, subtract 1 1/2 inch per pipe length for the overlap at each joint. Have shingles? See the DuraVent DuraPlus Roof Flashing in galvalume. The DuraVent DuraPlus DSA Roof Flashings ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.






Planning Your Installation








































