DuraVent PelletVent 90 Degree Elbow: a square turn from sideways to up
The DuraVent PelletVent 90 Degree Elbow is a vent fitting that makes a right angle turn for a pellet stove or insert. It changes a sideways run to an upward one. In a wall exit setup, it also sits atop the outdoor vertical pipe and holds the horizontal cap. The base rotates a full circle to face the direction you need, but the bend itself stays fixed. Its seams are sealed at the factory. PelletVent is DuraVent’s double wall pellet stove vent: a stainless steel inner pipe inside a galvalume outer pipe, sold in 3 and 4 inch sizes.
Choose a 3 inch or 4 inch diameter, then a galvalume or painted black finish. The stove maker sets the limit on how many elbows the run can have. A horizontal cap needs to reach at least 6 inches beyond the outside wall and face down to keep rain and snow out of the stove. For a roof exit, a vertical cap stands at least 12 inches above the roof. Need a gentler bend around an obstacle? See the DuraVent PelletVent 45 Degree Elbow. The DuraVent PelletVent 90 Degree Elbow ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.


















































