DuraVent PolyPro Black UV Resistant Tee: ends the vent outside with a sun resistant fitting
The DuraVent PolyPro Black UV Resistant Tee is a tee that ends a vent outside. Its black polypropylene resists ultraviolet light from the sun. It comes without a gasket, and the bird screen is sold separately. Choose a 2, 3, or 4 inch vent size on this page. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters. The standard gray PolyPro parts belong indoors. Outdoor parts exposed to the sun are black and UV resistant, including elbows, tees, and vent endings.
Before ordering, check that your appliance maker allows PolyPro for your appliance. In the USA, that approval and the appliance maker’s venting instructions determine its use. In Canada, DuraVent lists PolyPro as a separate vent system. Looking for a tee with bird screens included? See the DuraVent PolyPro Black Termination Tee with two open ends. The DuraVent PolyPro Black UV Resistant Tee ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 2PPS-TBC | 3PPS-TBC | 4PPS-TBC
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
2″ (60mm), 3″ (80mm), 4″ (100mm), 5″ (130mm), 6″ (150mm), and 8″ (200mm).
2″×4″ (60mm×100mm), 3″×5″ (80mm×130mm), 4″×6″ (100mm×150mm)
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video