DuraVent PolyPro to FasNSeal Adapter: joins PolyPro or a metric appliance outlet to FasNSeal
The DuraVent PolyPro to FasNSeal Adapter is an adapter that connects PolyPro pipe to DuraVent’s stainless steel FasNSeal vent. It can also connect an appliance outlet sized in metric measurements to FasNSeal. It fits at the appliance or farther along the vent run. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters. FasNSeal serves the same kinds of appliances. One locking clamp comes with the adapter to secure the joint. Choose a 3 inch, 4 inch, 5 inch, 6 inch, or 8 inch size on this page.
In the USA, the appliance maker must list PolyPro for that appliance, so the maker’s venting instructions determine its use. In Canada, DuraVent lists PolyPro as a separate vent system. Standard gray PolyPro parts stay indoors. Outdoor parts exposed to sunlight are black and resist ultraviolet light, which is why outdoor elbows, tees, and vent endings are black. Need to connect in the opposite direction? See the DuraVent PolyPro FasNSeal Adapter for the reverse connection. The DuraVent PolyPro to FasNSeal Adapter ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 3PPS-ADM-03FNSFC | 4PPS-ADM-04FNSFC | 5PPS-ADM-05FNSFC | 6PPS-ADM-06FNSFC | 8PPS-ADM-08FNSFC
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
3” (80mm) | 3” (80mm) | 4” (100mm) | 5” (130mm) | 6” (150mm) | 7” (178mm) | 8” (200mm)
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video