DuraVent DirectVent Pro Roof Support: holds your vent steady at the roof
The DuraVent DirectVent Pro Roof Support is a bracket that holds the vent pipe at roof level. It steadies the pipe above the roof and carries its weight so the joints below do not have to. DuraVent also uses it above a flexible vent section, which cannot carry that weight. DirectVent Pro is DuraVent’s pipe inside a pipe vent for direct vent gas fireplaces and stoves: exhaust goes out through the inner pipe and outside air comes in through the outer pipe. Choose the support for either 4 by 6 5/8 inch or 5 by 8 inch pipe on this page.
The flashing, the metal covering around the roof opening, is chosen to match the roof slope. Roofing goes over its upper edge. Every flashing needs a storm collar above it, sealed against the pipe with non hardening sealant. The cap at the top twist locks onto the final pipe length at least 1 foot above the roof, with more height needed on steeper roofs. Need the ring above the flashing? See the DuraVent DirectVent Pro Storm Collar. The DuraVent DirectVent Pro Roof Support ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.















































