DuraVent DuraPlus Starter Section: the anchor for a DuraLiner changeover inside a chase
The DuraVent DuraPlus Starter Section is a short anchor that the first DuraPlus chimney section twists and locks onto. It is only for changing from DuraLiner, DuraVent’s liner for an existing masonry chimney, to DuraPlus inside a chase, a boxed in enclosure around the chimney. Most installations do not need this separate piece. The ceiling supports, tee support bracket, and base plate already include one. DuraPlus is DuraVent’s triple wall chimney, the insulated pipe that takes over from the stovepipe at the ceiling or wall and runs up past the roof.
Choose a 6 or 8 inch diameter to match your chimney. The starter is about 4 inches tall and adds 3 inches to the run. DuraPlus chimney parts connect only with DuraPlus, not DuraTech or DuraChimney parts. With the appropriate shields and straps, the chimney can run exposed through an attic or up an outside wall. It can also sit inside a chase, but framing must never touch it. Starting above a factory built fireplace? See the DuraVent DuraPlus Base Plate fireplace starter. The DuraVent DuraPlus Starter Section ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.








Planning Your Installation








































