DuraVent PolyPro 8 Inch Collector Cap with Condensate Drain: adds a drain to an 8 inch tee
The DuraVent PolyPro 8 Inch Collector Cap with Condensate Drain is a cap that adds a drain outlet to an 8 inch vent tee. It closes the tee’s open end and lets condensate, the water that collects in the vent, drain away. DuraVent also calls this part a tee cap with condensate drain. One locking clamp comes with it to secure the joint. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters.
A horizontal PolyPro vent slopes back toward the appliance without low spots that could hold water. That lets condensate return to the appliance or reach a drain, with the appliance maker specifying how it must be drained. The vent itself uses only DuraVent PolyPro parts, not a mix of brands or joining methods. Connections to PVC, another brand’s polypropylene vent, or a metal vent need the adapters DuraVent makes for those connections. Need a drain for a 2 to 6 inch vent? See the DuraVent PolyPro Condensate Drain fitting. The DuraVent PolyPro 8 Inch Collector Cap with Condensate Drain ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 8PPS-CD
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
2″ (60mm), 3″ (80mm), 4″ (100mm), 5″ (130mm), 6″ (150mm), and 8″ (200mm).
2″×4″ (60mm×100mm), 3″×5″ (80mm×130mm), 4″×6″ (100mm×150mm)
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video