Grand Canyon Gas Logs Arizona Weathered Oak Charred Vented Gas Logs – AWOC

FAQ

Were real logs actually set on fire to create this design?

They were. Grand Canyon’s Log Hunter first selects a perfect set of Arizona Weathered Oak logs. Craftsmen then notch the centers and set them ablaze, letting fire burn through until a genuinely scorched front develops. Once cooled, the burned logs are cast into molds that capture every charred end, and an artist paints each casting to bring the charred wood to life.

Do gas logs need to be vented?

Sets like this one do. The Arizona Weathered Oak Charred collection is a vented product, which means it belongs in a fireplace that can draft to the outdoors, either indoors with a working flue or in an outdoor vented fireplace. That requirement is typical of traditional gas fireplace logs, so plan on a functioning chimney or an open-air installation rather than a sealed firebox.

What does the stainless steel fiber mesh inside the logs do?

It is the skeleton of the casting. Every log is built from high-temperature concrete and ceramic refractory with stainless steel fiber mesh running through the material, the same way rebar strengthens a slab. The mesh keeps each casting rigid and intact through years of direct flame, so the notched, scorched detailing on the charred faces stays crisp.

What sizes does the Arizona Weathered Oak Charred collection come in?

The charred collection is offered in 18, 24, 30, and 36 inch widths. Every size carries the same burned-through styling, because the scorched front is part of the casting itself rather than a surface treatment, so choosing between them is purely a matter of matching your firebox opening.

What is the difference between the millivolt and battery MVKEIK controls?

They solve the same problem two ways. A millivolt valve generates its own tiny electrical current from the pilot flame, so the system runs with no household wiring at all. The battery electronic MVKEIK ignition instead sparks the burner using batteries. Either way the fireplace stays completely independent of house power, which is worth knowing if you want a fire that works on the worst night of winter.

Why do people want gas logs that look already burned?

Because a fresh, untouched log set can look staged, like a fire that has never been lit. The charred collection adds organic beauty and a new style to the Native Series: a deeply scorched front and hand-painted finishes that make the set look as if it has been quietly burning in your own fireplace for years. The effect is a fire that looks lived-in from the very first evening.

Will the charred set work in a see-through fireplace?

Yes. Beyond standard front-view fireplaces, the charred logs are listed for see-through systems as well, and Grand Canyon publishes a dedicated see-through log placement diagram for the 24-inch set. In a double-sided firebox the scorched fronts need thoughtful positioning, and that factory diagram shows the layout the designers intended instead of leaving you to guess.