DuraVent CVS 45 Degree Elbow: a gentle turn around obstacles
The DuraVent CVS 45 Degree Elbow is an angled fitting for a CVS vent run. It lets the pipe pass around floor framing or another pipe in the way. Two elbows together move the run sideways, then point it back in its original direction. CVS is DuraVent’s concentric vent: the exhaust runs up a 3 inch inner pipe while combustion air comes in through the 5 inch outer pipe around it. This elbow fits CVS runs serving pellet stoves and inserts, plus gas appliances whose makers approve CVS for them. Choose a galvalume or painted black outer finish on this page.
The elbow has a slight slope to help condensate, the water that forms as exhaust cools, drain toward the appliance. Horizontal pipe also needs to rise at least 1/4 inch per foot away from the appliance. That slope keeps water from pooling and heat from collecting in the pipe. Wall straps hold each elbow offset in place, and horizontal runs need a strap every 8 feet. Need a square turn toward the roof? See the DuraVent CVS 90 Degree Elbow. The DuraVent CVS 45 Degree Elbow ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 35CVS-E45 | 35CVS-E45B
Applications
Concentric Venting System (CVS) (direct vent or two-pipe system) for use with condensing natural gas or propane Categories II, III and IV appliances or Canada’s Type BH Gas Vent Systems, (having a maximum rated operating temperature of 500°F). For use with Stoves and inserts of Type L gas, pellet, oil, corn and biofuel (Rated to a continuous use flue temperature up to 570°F). CVS can be used on a wide range of appliances, including: gas boilers, warm air furnaces, water heaters, unit heaters, tankless water heaters, pellet stoves, direct vent gas or propane stoves, heaters, and fireplaces.
Materials and Construction
Unitized concentric construction. Inner: Laser-welded UL approved 444 super-ferritic stainless steel .012″ Outer: Laser-welded, paintable, zincalume .018″ Silicone O-ring seals on inner liner and outer wall. Precision twist-lock connection on outer wall.
Clearances
CVS is listed to 0” clearance as a double-wall vent system for Category II, III, and IV appliances, for flue temperature of up to 400°F for horizontal enclosures, and up to 480°F for vertical enclosures. CVS must maintain 1” clearance to combustibles when used with pellet fuel. When CVS is used as a concentric/direct vent system on gas, the clearance to combustibles is specified by the appliance manufacturer.
Diameters
3″ inner and 5″ outer.
Listings
CVS vent pipe is listed to UL 1738 (MH25700) as a double-wall vent system for Category II, III and IV appliances. It is pressure rated to 10 WC for the inner pipe. This product is also intended to be used as a direct vent system for Listed to UL 1738 (DGSH.MH25700) and ULC S636 (DGSH7.MH25700). Pressure rated to 10” W.C. Listed to UL 641 (DFTX.MH8381), ULC S609 (DFTX7.MH8381), and ULC/ORD 441 (DFVAC.MH21150). Listed in combination with gas appliances, has been tested and listed as a decorative gas appliance system or as a direct vent heater system. Check with your appliance manufacturer for approval.