DuraVent PelletVent Cathedral Ceiling Support Box: supports the pipe through a sloped or flat ceiling
The DuraVent PelletVent Cathedral Ceiling Support Box is a black box that holds the vent pipe where it passes through the ceiling. It suits a sloped cathedral ceiling or a flat ceiling, with at least 2 inches showing below the finished surface. Trim and a pipe clamp come with it. PelletVent is DuraVent’s double wall pellet stove vent: a stainless steel inner pipe inside a galvalume outer pipe, sold in 3 and 4 inch sizes. Choose the box size to match your pipe.
The box is one support along an upward vent run. Wall straps hold the pipe every 4 feet and just above the tee. A ceiling support firestop spacer goes at each ceiling or floor crossing, and an insulation shield goes where the pipe enters an attic. High temperature sealant belongs on the stove outlet before the adapter goes on and beneath the storm collar, where it meets the pipe and roof flashing. Whether pipe joints need sealant depends on the stove maker’s instructions. Have an ordinary ceiling with an attic above? See the DuraVent PelletVent Ceiling Support Firestop Spacer. The DuraVent PelletVent Cathedral Ceiling Support Box ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.


















































