DuraVent PolyPro Wall Plate Gaskets: replacement seals where the pipe passes through the plate
The DuraVent PolyPro Wall Plate Gaskets is a pack of replacement seals for PolyPro wall plates. Each gasket seals the opening where the vent pipe passes through the plate. This is the gasket for that passage, rather than a gasket for a joint between pipes. You get 12 gaskets in a pack. Choose the 2, 3, or 4 inch size on this page to match your wall plate. PolyPro is DuraVent’s polypropylene vent pipe for high efficiency condensing gas boilers, furnaces, and water heaters.
A PolyPro vent uses DuraVent PolyPro parts, not a mix of different brands’ pipes or ways of joining them. Connections to PVC, another brand’s polypropylene vent, or metal venting need the adapters DuraVent makes for those connections. A plastic vent passing through a fire rated wall or floor also needs approved firestopping, a barrier that protects the opening against fire spread. Need the plate itself? See the DuraVent PolyPro Wall Plate. The DuraVent PolyPro Wall Plate Gaskets ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Details
SKU: 2PPS-GAW | 3PPS-GAW | 4PPS-GAW
Applications
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
Clearances
General: 0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C.
Vertical Installations: 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C.
Horizontal Installations: ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C.
Concentric vent system components, including Horizontal and Vertical Terminations: 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
Diameters
2” (60mm) | 3” (80mm) | 4” (100mm)
Listings
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Videos
Newly Designed PolyPro® Locking Clamps Video
PolyPro® Double-Wall Video
Why Polypropylene? DuraVent’s PolyPro® Venting System Video