Harvia Cilindro PC60: a 6 kW stone pillar heater with built in controls for saunas up to 294 cubic feet
The Harvia Cilindro PC60 is a 6 kW round pillar sauna heater that stands on the floor, with controls built into its base, so it needs no separate wall control. It heats saunas from 141 to 294 cubic feet. It goes against a wall or in a corner, shows its stones through the open front half of the casing, and measures 14 inches wide, 13 inches deep, and 40 inches tall. It weighs 37.5 pounds empty. The grate holds 200 pounds of stones directly on the heating elements for soft heat and lasting steam. Ladle water on the side for gentle steam or on the top for a sharp burst.
The box holds the heater and its manual, and it runs on a 240 volt circuit. Set the time and temperature with the two knobs at the bottom. Sauna stones are sold separately, so add the 5 boxes it needs on the page. A floor embedding flange and a safety rail, each available with or without LED lighting, and a bucket and ladle set are optional. Want a digital control outside the sauna instead? See the Harvia Cilindro PC60E sauna heater. The Harvia Cilindro PC60 ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
What size sauna is a 6kW heater right for?
The Cilindro PC60 is rated for sauna rooms from 141 to 294 adjusted cubic feet, so confirm your measured room volume sits inside that range before choosing it. If your sauna is larger than that, MyCozyOutdoors carries a full range of electric sauna heaters in higher outputs to match bigger rooms.
Does this model need an external control?
No – the PC60 in this listing comes with built-in controls, so you set and adjust the heater directly at the unit without buying or wiring a separate control panel. The electrical supply connection itself should still be made by a licensed electrician, per the installation and operation manual and your local codes.
How many sauna stones does it take, and where do I get them?
This heater requires a minimum of 200 lbs of sauna stones, which corresponds to the 5-box Required Stones option on this product page – add them to your order along with the heater. Harvia recommends one additional box as well, so you can choose the highest-quality stones for fit, form, and function; additional freight charges apply to that extra box.
How big is the heater itself?
The PC60 is a compact floor-standing pillar measuring 14 inches wide x 13 inches deep x 40 inches tall (355 x 330 x 1016 mm). It’s designed to install against a side wall or in a corner of the sauna room, so it takes up little floor area while still holding a large mass of stone.
What electrical service does it require?
Per the specification table, this heater runs on 240V single-phase power with a nominal draw of 25 amps. Have a licensed electrician handle the circuit and connection, following the installation and operation manual linked on this page along with your local electrical codes for breaker and wiring decisions.
What comes in the box, and is there a warranty?
You get the sauna heater plus the installation and operation manual, covered by a 2-year consumer-use warranty. The heater is designed, engineered, and made in Finland, with stainless steel heating elements, direct rock-to-element contact, and industrial-grade serviceable elements. Select the required stone boxes with your order on this page to complete the setup.
Shipping
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.