Harvia Cilindro PC110E: a 10.5 kW stone pillar heater for saunas from 141 to 636 cubic feet
The Harvia Cilindro PC110E is the largest Cilindro, a round, floor standing pillar heater that goes against a wall or in a corner, with the stones showing through the open front half of its casing. Its 10.5 kW output heats saunas from 141 to 636 cubic feet. Taller and wider than the smaller pillars, it measures 16 inches wide, 15 inches deep, and 45 inches tall. Its grate holds 264 pounds of stones, giving a big room soft, even heat with plenty of steam. Water on the side of the pillar makes gentle steam; water on the top makes it sharp. It weighs 46 pounds empty.
You get the heater and its manual. It needs a Harvia Xenio wall control to run, and you add that on the page. Sauna stones are sold separately, so add the 6 boxes it needs on the page. A floor embedding flange, a safety rail, and a bucket and ladle set are optional. Smaller sauna? The Harvia Cilindro PC90E sauna heater covers up to 494 cubic feet. The Harvia Cilindro PC110E ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
How large a sauna can a 10.5kW heater power?
The Cilindro PC110E covers sauna rooms from 141 up to 636 adjusted cubic feet, per its specification table. Verify that your room’s measured volume falls within that range, and consult the Cilindro E Series installation manual linked on this page for how your particular room build factors into heater sizing.
Does this heater come with controls?
No – the PC110E is an E-model, which operates through a separate Harvia Xenio digital control that is required for operation. It’s available right on this page under the Sauna Heater Controls option (the Xenio CX45 digital control with WiFi), so add it to your order together with the heater.
How many stones does it need, and are they included?
The stones ship in their own boxes rather than inside the heater carton: this model calls for roughly 265 lbs of sauna stones, which is the 6-box Required Stones selection on this page – choose it when ordering. Harvia also recommends an extra box so you can hand-select stones for fit, form, and function; additional freight charges apply.
What are the power requirements?
The specification table lists 240V single-phase service with a nominal draw of 43.75 amps. A licensed electrician should design and connect the circuit using the installation manual linked on this page and your local electrical codes; the manual is the authority on breaker sizing, wiring, and hookup details.
Can you throw water on the stones?
Yes. The grate-like outer shell holds a large stone mass, and the steam responds to where the water lands: throw it on the side of the heater for softer steam, or straight onto the top of the stone pillar for a sharper blast. That bather-adjustable steam is what defines the Cilindro series.
What are its dimensions?
The PC110E measures 16 inches wide x 15 inches deep x 45 inches tall (406 x 381 x 1143 mm) – a floor-standing steel pillar that installs along a side wall or in a corner of the sauna room. Confirm placement clearances against the installation manual on this page before building around it.
What's in the box, and what warranty applies?
The shipment includes the sauna heater and the installation and operation manual, with a 2-year warranty for consumer use. The heater is designed, engineered, and made in Finland, with stainless steel elements, direct rock-to-element contact, and industrial-grade serviceable heating elements. The required Xenio control and stone boxes are added with your order on this page.
Shipping
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.