Summerset 8 inch Spacer Bracket for the 42 inch Vent Hood: brings the hood farther over a deep counter
The Summerset 8 inch Spacer Bracket for the 42 inch Vent Hood is a stainless steel bracket for a vent hood. It goes between the wall and the hood at install time and pushes the hood 8 inches farther out, so the hood ends up over the grates where the smoke rises. Use it when the grill sits forward on a deep counter. It fits only the 42 inch hood; each hood size has its own 4 inch and 8 inch brackets. It is built from 304 stainless steel, the grade that holds up best outdoors, and Summerset backs it with a lifetime warranty.
Choose this depth when a deep counter or thick backsplash puts the grill well forward and 4 inches is not enough. The bracket hides behind the hood once it is up. Need less reach? See the Summerset 4 inch Spacer Bracket for the 42 inch Vent Hood. The Summerset 8 inch Spacer Bracket for the 42 inch Vent Hood ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
When does a 42-inch hood need 8 inches of extension?
When the grill sits notably forward – deep countertops, thick masonry backsplashes, or a layout where the grates start far from the mounting wall. The VH42-3-SP8 pushes the canopy out a full 8 inches so smoke rises into it, not in front of it.
Is this interchangeable with other hood sizes?
No – it is drilled for the 42-inch hood specifically. Every canopy width in Summerset’s outdoor vent hood family has its own matched 4-inch and 8-inch brackets, so the fit is exact rather than universal-adapter approximate.
Could I just use the 4-inch bracket instead?
Only if 4 inches solves your measurement – the two exist because installs differ. Compare the grill-to-wall distance against the 42-inch hood’s clearance diagram; if the shortfall is closer to a hand-span than a couple of fingers, this 8-inch bracket is the honest answer.
What material is it?
304 stainless steel throughout, matching the double-lined 42-inch canopy it carries. Outdoors, that means the hidden structural part is as corrosion-proof as the visible one – no rust streaks bleeding out from behind the hood after a wet winter.
Does more standoff reduce suction at the grill?
No – the dual motors still move their full 2000 CFM. What changes is geometry, for the better – with the canopy actually over the grates, more of the smoke column enters the hood, which is the entire reason to fit the VH42-3-SP8.
Can I retrofit it under an installed hood?
Yes, but the 42-inch hood must come down first, since the bracket sits between hood and mounting surface. It is a manageable two-person job – just plan the rehang for a day when the grill is cold and the patio is clear.
What about warranty coverage?
The 8-inch bracket for the 42-inch hood is covered under Summerset’s Gold Standard Lifetime Warranty, same as the canopy above it. For load-bearing hardware living outdoors, lifetime coverage is the detail worth noticing before you buy.