Summerset 8 inch Spacer Bracket for the 48 inch Vent Hood: more reach over a deep counter
The Summerset 8 inch Spacer Bracket for the 48 inch Vent Hood is a bracket for a vent hood. It goes between the wall and the hood at install time and pushes the hood 8 inches farther out, so the hood ends up over the grates where the smoke rises. Use it when the grill sits forward on a deep counter. It fits only the 48 inch hood; each hood size has its own 4 inch and 8 inch brackets. It is built from 304 stainless steel, the grade that holds up best outdoors, and Summerset backs it with a lifetime warranty.
Pick this depth for a grill well forward on a deep counter or behind a thick backsplash, when 4 inches is not enough. It hides behind the hood once it is up. Need less reach? See the Summerset 4 inch Spacer Bracket for the 48 inch Vent Hood. The Summerset 8 inch Spacer Bracket for the 48 inch Vent Hood ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
Why would a 48-inch hood need more reach?
Because large islands run deep – a 44-inch grill on a generous countertop can sit a long way from the mounting wall. The VH48-3-SP8 adds 8 inches of extension so the canopy follows the grill out and smoke rises into stainless, not open air.
Is the 8-inch version overkill for most installs?
Not overkill, just specific – it exists for layouts the 4-inch bracket cannot fix. Measure your grill-to-wall offset against the 48-inch hood’s mounting diagram; the answer falls out of the tape measure before you spend anything on either bracket.
Does it only fit the 48-inch hood?
Yes – the mounting pattern is keyed to the 48-inch canopy. Owners of the 36, 42, or 60-inch models should order the 8-inch spacer named for their size; every width in the family has its own matched pair of brackets.
Will the extra depth strain the mounting?
The bracket is engineered for exactly this – 304 stainless, sized to carry the 48-inch double-lined canopy at full 8-inch standoff. Anchor into sound framing per the manual and the assembly is as permanent as any hood in our outdoor vent hood range.
Does hood performance change at 8 inches?
Extraction stays at the full 2000 CFM the dual motors produce – the spacer moves the canopy, not the airflow. Better positioning over the grates generally means more smoke captured, which is why deep-offset installs need this bracket in the first place.
What upkeep does the bracket need?
None – it is a solid 304 stainless structural part with no moving pieces, tucked behind the 48-inch hood. If you wipe the canopy down seasonally, any visible bracket edge gets cleaned in the same pass, and that is the whole maintenance schedule.
Is hardware like this really under lifetime warranty?
With Summerset, yes – the Gold Standard Lifetime Warranty extends to the VH48-3-SP8. The philosophy is that anything shipped for permanent outdoor installation should be covered for as long as it hangs there, mounting brackets included.