Summerset Grill Liner for the 36 inch Quest: A heat barrier for a wood framed island
The Summerset Grill Liner for the 36 inch Quest is a stainless steel sleeve that lines the cutout for a built in grill. It is for an island framed in wood or any other material that can burn, because the heat from the grill would otherwise reach the framing. Liner means a double walled stainless steel box, one inch thick, that goes into the cutout first, and the grill drops into it. It fits only the 36 inch Quest. Each grill size has its own liner. It is built from 304 stainless steel, the grade that holds up best outdoors, and Summerset backs it with a lifetime warranty.
This liner is for a wood framed island around the mid size Quest. An island built entirely of block, metal studs, and cement board does not need one. Frame the opening to the liner size in the grill manual, not to the grill itself. Planning around the larger Quest? See the Summerset Grill Liner for the 42 inch Quest. The Summerset Grill Liner for the 36 inch Quest ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
Which Quest takes the GL-QST36?
The 36-inch Quest – the mid-size of the three Quest heads. Summerset cuts each liner per model, so the 30- and 42-inch Quest grills each use their own SKU. Match the liner to your exact grill before any framing gets built around it.
Is an insulated liner a safety requirement or just a recommendation?
Treat it as a requirement: grill makers mandate insulated liners for installs into combustible enclosures, and a wood-framed island around a 36-inch Quest qualifies. The GL-QST36 is what satisfies that requirement; skipping it risks both your structure and your final inspection.
How does the double-wall design work?
Two #304 stainless walls built into one 1-inch thick sleeve. Heat leaving the Quest 36’s body hits the inner wall, and the separation keeps it from conducting through at dangerous temperatures – a simple, passive way to make a wood-framed outdoor kitchen genuinely safe.
What is the install order for grill and liner?
Liner first, always. The GL-QST36 seats into the framed cutout, then the 36-inch Quest lowers in and connects to gas. Doing it the other way around eventually means disconnecting and lifting the whole grill out to correct the mistake.
My builder is using metal studs and cement board – still needed?
A genuinely noncombustible enclosure – metal framing, cement board, masonry – does not require the GL-QST36. Just verify nothing combustible hides inside the cavity: wood blocking or trim tucked behind the finish would put the requirement back in play for the Quest 36.
How long will the liner itself last?
It is covered by the Gold Standard Lifetime Warranty and built from weather-resistant #304 stainless, so the honest answer is: longer than the rest of the island. There is nothing on the GL-QST36 to wear out, loosen, or corrode away.
Does it need cleaning?
Only cosmetically. The GL-QST36’s visible lip around the Quest 36 wipes clean with regular stainless cleaner, and everything else is sealed inside the island where dirt never reaches. There is no scheduled upkeep to remember from season to season.