Real Fyre Charred Evergreen Split Oak: a vented gas log set with split oak faces
The Real Fyre Charred Evergreen Split Oak is a vented gas log set. It copies split evergreen oak with exposed wood faces. Charred bark edges give it the look of a tended wood fire. It is a vented set, so it needs a real fireplace with a working chimney and burns with the damper open. You get the tallest and most natural flames, and most of the heat goes up the chimney. It comes in 18, 24, or 30 inch sets. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a fiber reinforced ceramic made for high heat, with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the G52 burner, plain or stainless steel for an outdoor fireplace. You also pick how it lights: by hand with a match on natural gas, with a knob and a pilot light that stays lit, or with a remote. The G52 burner is built in two tiers, so the flames rise up through the logs instead of under them, and you get a taller, fuller fire on less gas than a flat burner gives. A Fyreback, a steel panel that stands behind the fire, is optional. Prefer whole logs? See the Real Fyre Charred Evergreen Oak vented gas log set. The Real Fyre Charred Evergreen Split Oak ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: ENS-18 | ENS-24 | ENS-30
Burner Styles
Product Sizes
Vented Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G4-12″ = 25,000 BTUs)
** Check your local codes for your area requirements.
* For use with CHMJ-60, CHMJ-72, & RDP-60
FAQ
Why pick the split-oak version of the Radiant Fyre sets?
Because split wood tells a different story. The ENS shows cleaved faces and crisp charred bark edges, the look of a tended fire rather than whole trunks just lit, and it renders that detail in the exclusive fiber-enhanced refractory ceramic the G52 Radiant Fyre sets are molded from. Same platform as the whole-log ENO, different personality.
Will a new set like this give off odors?
Briefly, maybe. Fresh ceramic can release a mild scent over the first few burns as manufacturing residues cook off, and it clears quickly. During normal use the ENS runs vented with the damper open, so combustion odors leave up the flue. Raw gas smell is a different matter entirely; shut down and call your installer.
What other looks run on the same G52 burner?
Four sets share the Radiant Fyre platform: this Charred Evergreen Split Oak, the whole-log Charred Evergreen Oak, plus the Burnt Aspen and Colonial Oak styles. If you install the G52 with the ENS now, you are choosing a burner family with several distinct log personalities available across it.
How fussy is the log placement on a split set?
Follow the diagram and it is not fussy at all. Real Fyre publishes placement instructions specific to the Charred Evergreen Split Oak, positioning each split log so the G52 flames rise between the faces rather than against them. Set it once at installation, verify at the start of each season, and leave it alone otherwise.
Is a ceramic log set a buy-once purchase?
Close to it. The ENS logs are refractory ceramic with steel reinforcement in each log, built to hold their strength at high temperatures across years of fires. Bark detail does not burn away because nothing is being consumed. Most owners replace sets for a style change long before wear demands it.
How do the ENS sizes break down?
Three sets: ENS-18, ENS-24, and ENS-30, covering standard firebox widths. Measure the front opening, back wall, and depth, then round down between sizes. If none of the three fits an unusual firebox, the broader Real Fyre vented gas logs catalog carries runs that stretch both smaller and wider.
Do I need a powered ignition for the G52?
No. Like other Real Fyre vented systems, the G52 under the ENS can be configured with controls that need no household power, alongside remote-ready electronic options. Choose the valve at purchase together with your fuel type, since natural gas versus propane is a factory configuration rather than a later conversion.