Real Fyre Split Oak Designer Plus Enhanced: split oak logs with a fuller vented flame
The Real Fyre Split Oak Designer Plus Enhanced is a vented gas log set. The logs copy straight split oak, with flat split faces. Their hand painted finish gives the fireplace a wood fire look. It is a vented set, so it needs a real fireplace with a working chimney and burns with the damper open. You get the tallest and most natural flames, and most of the heat goes up the chimney. It comes in 18, 20, 24, or 30 inch sets. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a ceramic made for high heat with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the burner. The choices are the G45, or the G45 in stainless steel for an outdoor fireplace. You also pick how it lights: by hand with a match on natural gas, with a knob and a pilot light that stays lit, or with a remote. Enhanced means the Flame Enhancer Kit comes in the box: a back log with ceramic fiber in it, a reflective steel panel, and black embers. Together they give a fuller flame and push more heat into the room than the standard set. A Fyreback, a steel panel that stands behind the fire, is optional. Prefer the standard version? See the Real Fyre Split Oak Designer Plus vented gas log set. The Real Fyre Split Oak Designer Plus Enhanced ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: SDP-18-FE | SDP-20-FE | SDP-24-FE | SDP-30-FE | SDP-36-FE
Burner Styles
- G4 Burner System
- G45 Burner System
- G45 Stainless Steel
Product Sizes
- 18 Inch
- 20 Inch
- 24 Inch
- 30 Inch
- 36 Inch
Vented Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G4-12″ = 25,000 BTUs)
** Check your local codes for your area requirements.
* For use with CHMJ-60, CHMJ-72, & RDP-60
FAQ
Which buyer should pick the Split Oak Designer Plus Enhanced?
Someone who loves the cleaved, straight-split character of the SDP stack but wants the fire itself to do more. The SDP-FE bundles the flame-boosting components with the hand-painted split oak logs in one SKU, for a bigger flame picture and more radiant push than the standard set delivers, within the Real Fyre vented range.
What burner options does the spec list?
Three: the G4, the G45, and the G45 in stainless steel, all vented systems that run with the damper open. Fuel type, natural gas or liquid propane, is built into the burner at the factory when you order the SDP-FE, so match it to your existing supply line.
Which openings do the SDP-FE sizes fit?
The size list covers 18, 20, 24, and 30-inch options, a tight ladder that leaves little gap between steps for most residential fireboxes. As always with gas logs, when your opening falls between two sizes, take the smaller SDP-FE so the enhanced flame keeps its clearance.
Does the enhanced hardware change how the fire looks?
Noticeably. The ceramic fiber-infused back log glows in the flame, the steel panel behind it brightens and reflects the fire forward, and the black ember bed carpets the burner in low, live sparkle. Over the split oak stack, the result is a taller, fuller, more energetic SDP-FE flame picture.
Should a screen stand in front of this set?
It is wise, though not a requirement of the equipment. The SDP-FE throws stronger radiant heat than a plain vented set, and a mesh screen keeps children, pets, and drifting furnishings at a respectful distance without dimming the view. Any glass doors should stay open while the fire runs.
What should I measure before ordering?
Three dimensions: firebox width across the front opening, width along the back wall, and depth front to back. Compare those against the SDP-FE set dimensions, remembering the rear of a masonry firebox is usually narrower than the front, and settle on the smaller size whenever you fall between.
How do I actually start the fire on this set?
That depends on the ignition you pair with it. A match-lit G4 under the SDP-FE lights by hand at the burner, a safety-pilot G45 lights from its standing pilot, and electronic packages start from a switch or remote. All of them beat kindling a wood fire by several minutes.