Real Fyre Split Oak Designer Plus See Thru: split oak logs finished for a two room fireplace
The Real Fyre Split Oak Designer Plus See Thru is a vented gas log set for a fireplace that opens into two rooms. The split oak logs have textured bark and natural wood colors. Each is hand painted all the way around. It is made for a see through fireplace, one that opens into two rooms, and the logs are finished on both sides so both rooms get the same fire. It is a vented set, so it needs a real fireplace with a working chimney and burns with the damper open. You get the tallest and most natural flames, and most of the heat goes up the chimney. It comes in five sizes, from 18 to 36 inches. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a ceramic made for high heat with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the G45-2 see through burner, in plain or stainless steel. You also pick how it lights: by hand with a match on natural gas, with a knob and a pilot light that stays lit, or with a remote. A Fyreback, a steel panel that stands behind the fire, is optional. Have a fireplace with just one opening? See the Real Fyre Split Oak Designer Plus vented gas log set. The Real Fyre Split Oak Designer Plus See Thru ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: SDP-2-18 | SDP-2-20 | SDP-2-24 | SDP-2-30 | SDP-2-36
See-Thru Burner Styles
- G45-2 See-Thru Burner System
- G45-2 See-Thru Stainless Steel
Product Sizes
- 18 Inches
- 20 Inches
- 24 Inches
- 30 Inches
- 36 Inches
Vented Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G4-12″ = 25,000 BTUs)
** Check your local codes for your area requirements.
* For use with CHMJ-60, CHMJ-72, & RDP-60
FAQ
Is the detail really finished on both sides?
Yes, and that is the SDP-2’s whole reason to exist. The sculpting, bark texture, and hand-painted color wrap fully around each log, so every opening of a dual-sided firebox faces finished split oak. A standard one-sided stack would show one room its plain back; this set has no back.
What burner does a see-thru split oak need?
The G45-2 see-thru system, in standard or stainless steel, is the sole listing on the SDP-2 spec. Its burner arrangement is laid out for dual-opening fireboxes so the flame reads well from either side, and it is ordered factory-configured for natural gas or propane to match your line.
How many sizes cover see-thru fireboxes?
Five in this set: SDP-2-18, SDP-2-20, SDP-2-24, SDP-2-30, and SDP-2-36. That 36-inch top end makes the SDP-2 the split oak choice for genuinely wide dual-opening fireboxes. When your opening lands between two sizes, take the smaller set.
How does the SDP-2 relate to the regular SDP?
Same wood, different architecture. Both share the Split Oak Designer Plus carving and hand-painted finish, but the standard SDP is built front-facing for a conventional firebox on G4, G45, or G46 burners, while the SDP-2 is fully two-sided and pairs exclusively with the G45-2. Pick by your fireplace, not the logs.
Does the heat reach both rooms?
Radiant warmth comes off the ceramic logs in every direction, so both openings share it, though as a vented set most combustion heat still travels up the flue. The SDP-2 is chosen for atmosphere on two sides of a fireplace rather than as a primary heat source.
What is involved in keeping a two-sided set clean?
Less than you might expect, since both faces of the SDP-2 are reachable without unloading the firebox. With everything cool, brush dust off the logs and vacuum around the ember bed from each side. Skip liquids entirely, and recheck log placement against the diagram before you relight.
Do I need screens on a see-thru fireplace?
With two openings there are two places for sparks or curious hands to reach the fire, so mesh panels on both sides are sensible, especially around children or pets. Nothing about the SDP-2 requires them for operation; they are a household-safety choice rather than an equipment requirement.