
Straight Scupper: the simplest trough spout with a rolled lip, in copper or stainless, 6 to 12 inches
The Outdoor Plus Straight scupper is the simplest spout in the range: a trough with two tall side walls and a flat floor that rolls into a smooth curved lip, so the water leaves as one even sheet. It sets into a pool wall, spa wall, or raised planter and is made in the USA. Choose 6, 8, 10, or 12 inches wide in copper, which slowly darkens outdoors, or stainless steel, which stays bright.
Your builder plumbs the supply line to the back. Want a wider spout with a rounded lip? The Radius scupper runs up to 48 inches. The Straight scupper ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Speifications
SKU Copper: OPT-SS6 | OPT-SS8 | OPT-SS10 | OPT-SS12 |
SKU Stainless Steel: OPT-SS6-SS | OPT-SS8-SS | OPT-SS10-SS | OPT-SS12-SS
| Scupper Size |
10″, 12″, 6″, 8″ |
| Finish |
Copper, Stainless Steel |
FAQ
What look does the Straight Scupper give a pool wall?
The cleanest one there is: a straight, uninterrupted lip that delivers water in a simple, honest ribbon. No curves, no flare, just a crisp line of falling water. For minimalist, modern, and geometric pool designs, the Straight Scupper is the quiet default done right.
Where can I find exact sizes and SKUs for the Straight Scupper?
The listing’s spec tab is brief for this one, so grab the manufacturer’s specification sheet on the product page, or contact us at mycozyoutdoors.com and we will confirm available widths, SKUs, and lead times for the Straight Scupper before you commit your wall dimensions to the plan.
What finishes does the Straight Scupper come in?
Copper and stainless steel, both solid metal. Copper starts bright and settles into a warm, weathered patina over the seasons; stainless steel keeps the Straight Scupper’s sharp modern line looking exactly as installed. Choose by the palette of your stone, tile, and coping.
How does a straight-lip scupper differ from a rainfall or arch scupper?
It is about the shape of the water. A rainfall unit splits flow into strands and an arch unit throws it outward; the Straight Scupper commits to a single flat ribbon falling close and clean. Pick it when you want architecture, not theatrics, from the water.
Who installs the Straight Scupper and when?
A pool contractor or landscape plumber, ideally while the wall is being built so the recirculating supply line hides completely. The Straight Scupper is set flush, fed from a manifold, and dialed in with a balancing valve until the ribbon falls evenly across its full width.
How do I winterize the Straight Scupper?
You winterize the plumbing, not the scupper. Have the feature lines drained during pool closing and the Straight Scupper’s solid copper or stainless body can face ice and snow indefinitely. It stays mounted; only trapped water in supply pipes ever causes freeze damage.
Is the Straight Scupper water-only?
Yes, there is no gas line or burner in it. It supplies the water element of a wall; flames come from a separate fire vessel nearby. For companion pieces in the same spirit, browse our water bowls, which share the same recirculating-water logic in freestanding form.