DuraVent DuraFlex Stainless Mortar Sleeve: a collar for the opening through your chimney wall
The DuraVent DuraFlex Stainless Mortar Sleeve is a short collar that lines the opening through a brick or block chimney wall. It keeps the liner or the side branch of a tee fitting from rubbing against the brick. Mortar fills the space around the sleeve to make an airtight seal. This sleeve fits both stainless steel and aluminum DuraFlex liners. DuraFlex Stainless is DuraVent’s flexible stainless steel liner for relining a masonry chimney that vents a wood, pellet, oil, or gas appliance. Relining puts a new vent pipe inside the old chimney.
Choose the diameter that matches your liner: 3, 4, 5, 5 1/2, 6, 7, or 8 inch. Before the liner goes in, the chimney needs cleaning and inspection, with loose bricks and worn mortar repaired. The liner is lowered into the chimney from above. For a narrow passage or one with bends, a rope attached to a puller lets someone below help guide it while someone above pushes and turns it. Need help guiding the liner down? See the DuraVent DuraFlex Stainless Flex Puller guide cone. The DuraVent DuraFlex Stainless Mortar Sleeve ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































