Real Fyre Charred Cinder Split: split logs with a burned through look
The Real Fyre Charred Cinder Split is a vented gas log set. The split logs look burned through, opened up to a glowing core. Exposed embers and chunks of char stand out against black embers. It is a vented set, so it needs a real fireplace with a working chimney and burns with the damper open. You get the tallest and most natural flames, and most of the heat goes up the chimney. It comes in 18, 24, or 30 inch sets. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a ceramic made for high heat with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the burner. The choices are the G45, the G45 in stainless steel for an outdoor fireplace, or the G46, which hides its controls. You also pick how it lights: by hand with a match on natural gas, with a knob and a pilot light that stays lit, or with a remote. A Fyreback, a steel panel that stands behind the fire, is optional. Prefer a birch look? See the Real Fyre Charred Cinder Birch vented gas log set. The Real Fyre Charred Cinder Split ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: CNDS-18 | CNDS-24 | CNDS-30
Burner Styles
- G4 Burner System
- G45 Burner System
- G45 Stainless Steel
- G46 Burner System
Product Sizes
- 18/20 Inch
- 24 Inch
- 30 Inch
Vented Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G4-12″ = 25,000 BTUs)
** Check your local codes for your area requirements.
* For use with CHMJ-60, CHMJ-72, & RDP-60
FAQ
How does the Charred Cinder Split differ from its oak sibling?
Same Premier Series drama, different wood story. The CNDS swaps the CNDO rounded oak trunks for split-style logs with a mature, burned-through character – a fire that looks hours old, opened up to its glowing core. If the cinder aesthetic appeals but you prefer split cordwood, this is your lane.
Sizes and burners for the CNDS?
Three sizes – 18/20, 24 and 30 inches – running on the G4, G45, G45 stainless steel or G46 vented burner systems. Natural gas or propane is a factory configuration chosen at order time, and standard fireboxes across that width range are well covered.
What role do the black embers play?
They ground the whole presentation. The Charred Cinder styling pairs its burned-through split logs and decor chunks with black embers, which read as the settled char of a long fire and make the glowing areas pop by contrast. It is finish-work, and it carries the CNDS look.
Why are gas logs made from ceramic?
Because nothing else shrugs off the duty: refractory ceramic keeps its structural strength while parked in flame night after night, holds crisp burnt detailing, and radiates stored heat back into the room. Each CNDS log adds an internal steel rod. The whole Real Fyre vented gas logs line is built this way.
Does the CNDS need to be plugged into anything?
No cord, no outlet. Gas and a flue are the requirements; match-lit and standing-pilot burner options run with no electricity whatsoever. Electronic ignition and remote control are available choices that do introduce batteries or power, but they are conveniences on this set, never necessities.
What measurements matter before ordering?
Three: the width across your firebox opening, the width along the back wall, and the front-to-back depth. Fireboxes taper, so the back number often decides. Fit the CNDS to the tightest dimension and round down between sizes – crowded logs soot, roomy ones burn clean.
My fireplace has a chimney – could I still run vent-free logs in it?
You could, where local codes allow; vent-free sets install legally in many vented fireboxes and bring oxygen-depletion sensors with them. Some jurisdictions prohibit them outright, so verify first. The CNDS itself takes the opposite path – vented by design, burning only with the damper open.