Real Fyre Charred Rugged Split Oak See Thru: a gas fire for two rooms
The Real Fyre Charred Rugged Split Oak See Thru is a vented gas log set for a fireplace that opens into two rooms. It is made for a see through fireplace, one that opens into two rooms, and the logs are finished on both sides so both rooms get the same fire. Jagged split faces, torn bark, and heavy char give it a rough wood look. The logs copy wood that has already burned for hours. It is a vented set, so it needs a real fireplace with a working chimney and burns with the damper open. You get the tallest and most natural flames, and most of the heat goes up the chimney. It comes in 18, 20, 24, or 30 inch sets. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a ceramic made for high heat with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the G45-2 see through burner, in plain or stainless steel. You also pick how it lights: by hand with a match on natural gas, with a knob and a pilot light that stays lit, or with a remote. A Fyreback, a steel panel that stands behind the fire, is optional. Have a one sided fireplace? See the Real Fyre Charred Rugged Split Oak vented gas log set. The Real Fyre Charred Rugged Split Oak See Thru ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: CHRRSO-2-18/20 | CHRRSO-2-24 | CHRRSO-2-30
Burner Styles
- G45-2 Burner System
- G45-2 Stainless Steel
Product Sizes
- 18/20 Inches
- 24 Inches
- 30 Inches
Vented Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G4-12″ = 25,000 BTUs)
** Check your local codes for your area requirements.
* For use with CHMJ-60, CHMJ-72, & RDP-60
FAQ
How do I get the measurements right for a see-thru installation?
Measure the opening width from each of the two rooms – trim and facing often differ side to side, and the smaller figure governs – then measure the pass-through depth of the wall itself. The CHRRSO-2 stack needs clearance at both faces, so depth is every bit as decisive as width.
Which burner, and why that one?
The G45-2, standard or stainless: a dual-face vented system that feeds flame toward both openings at once. A conventional burner aims its presentation one way and would shortchange the far room. Any qualified fireplace installer will treat the G45-2 as non-negotiable for this set.
What are the CHRRSO-2 vitals?
Rugged split oak charring finished on both faces, in three sizes – 18/20, 24 and 30 inches. Refractory ceramic construction with steel rods through every log, radiant heat during and after operation, and the same torn-bark texture as the single-sided version, doubled so neither room sees a rough draft.
Does log arrangement change on a two-sided burner?
Yes – the CHRRSO-2 diagram composes the stack for two audiences, balancing split faces and char toward both openings while keeping ceramic out of direct flame. It is less forgiving than a one-sided set, where the back stays hidden. Set it per the diagram and leave it set.
How much warmth do the two rooms actually get?
Split the honest vented answer in two: most combustion heat rises out the open flue, while the ceramic mass radiates gentle warmth – and the CHRRSO-2 radiates it toward both rooms rather than one. Think evenly shared ambiance heat, not a substitute for the furnace on either side.
What does installing a see-thru set involve?
A licensed gas professional, as with any log set, plus see-thru specifics: routing the line into a divider firebox, leveling the G45-2 so both faces present correctly, and clamping the damper open. Placement of each CHRRSO-2 log follows the two-sided diagram. Budget more time than a standard retrofit.
Could ventless logs ever take over this firebox?
Where codes permit, vent-free sets can occupy vented fireboxes – but two-sided vent-free is its own product category with its own listings, so it is not a simple swap. The CHRRSO-2 you would be replacing is strictly vented: open damper and working flue, every single burn.