DuraVent DirectVent Pro 8×11 90 Degree Elbow: a square turn toward the outside wall
The DuraVent DirectVent Pro 8×11 90 Degree Elbow is a vent fitting that makes a square turn. It sits above the pipe rising from the fireplace and points the vent out through the wall toward the wall cap. The base swivels so you can aim the elbow without undoing its twist lock connection. The bend itself stays at 90 degrees. DirectVent Pro 8×11 is DuraVent’s large size pipe inside a pipe vent for big direct vent gas fireplaces, with an 8 inch exhaust pipe inside an 11 inch air pipe.
Two of these elbows with pipe between them make an offset, a detour around a joist or beam. That section needs an elbow strap for support every 4 feet. The fireplace manufacturer’s instructions set how far the vent may shift around an obstruction. Like the straight pipe, this elbow has a galvalume outer wall and a stainless steel inner pipe. Need a gentler turn around something? See the DuraVent DirectVent Pro 8×11 45 Degree Elbow. The DuraVent DirectVent Pro 8×11 90 Degree Elbow ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































