DuraVent DirectVent Pro 8×11 45 Degree Elbow: a gentler turn around beams and joists
The DuraVent DirectVent Pro 8×11 45 Degree Elbow is a bend that changes the direction of a fireplace vent run. Use two elbows with pipe between them to step around a joist or beam and return to the original direction. This gentler bend puts less restriction on both exhaust and incoming air than a 90 degree elbow. DirectVent Pro 8×11 is DuraVent’s large size pipe inside a pipe vent for big direct vent gas fireplaces, with an 8 inch exhaust pipe inside an 11 inch air pipe.
The elbow turns on its base so it can face the right way while its twist lock connection stays engaged. Turning the base does not change the bend itself, which stays at 45 degrees. The sideways section needs an elbow strap, a support that holds the pipe in place, every 4 feet. The fireplace manufacturer’s instructions set how far sideways the run may shift. Need a square turn toward the wall? See the DuraVent DirectVent Pro 8×11 90 Degree Elbow. The DuraVent DirectVent Pro 8×11 45 Degree Elbow ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































