
Square flat pan with brass triple S bullet burner: three curved arms with brass ports, 18 to 60 inches
The Outdoor Plus square flat pan and brass triple S bullet burner fits square fire pits. Made in the USA in sizes from 18 to 60 inches square, its rimless stainless plate rests atop your enclosure beneath lava rock or fire glass. Three S-shaped stainless arms swirl from a center hub, with upright brass bullet ports producing taller, fuller flames than drilled tubes.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Prefer all-stainless ports? See the square flat pan with stainless triple S bullet burner. The square brass triple S bullet set ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Flat Square Pan and Triple S Bullet Burner – Specification Sheets
SKU: OPT-BFP18S | OPT-BFP182S | OPT-BFP24S | OPT-BFP30S | OPT-BFP36S | OPT-BFP48S | OPT-BFP60S
| Size |
18″ A, 18″ B, 24″, 30″, 36″, 48″, 60″ |
| Materials |
Brass, Stainless Steel |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
Why put curving brass arms inside a square pan?
Contrast. The square flat pan frames the fire in hard geometry while the Triple-S bullet burner swirls three S-shaped arms of brass jets inside it — curves inside corners. It is the most sculptural pairing in the square flat line, and the brass build means it stays that way.
What sizes and SKUs does the square brass Triple-S span?
Seven: two 18-inch configurations (A and B per the spec sheets), then 24, 30, 36, 48 and 60 inches square — OPT-BFP18S through OPT-BFP60S. For the 18-inch, match the A or B drawing to your opening before ordering.
What metals am I buying?
A stainless steel pan carrying a brass burner — the pan wants stiffness and weatherproofing, the burner wants brass’s near-immunity to corrosion where flame, condensation and media dust concentrate. It is the specification for features that should outlive their landscaping.
Is brass overkill away from the coast?
Not overkill — headroom. Inland, stainless burners do fine; brass simply removes the question everywhere, including around pool splash, irrigation overspray and winter. If the OPT-BFP-S feature is a permanent part of the hardscape, brass is the specify-once answer.
How do I turn this pan into a finished square fire pit?
Build a square enclosure with a supported cap, cut the opening, run gas to a key valve and set the flat pan across it — masonry around an engineered core, which is every custom gas fire pit in one sentence. A licensed gas fitter connects and leak-tests.
Marshmallows over the swirling jets — fine?
Better than fine: three arms of clean brass jets give a square feature roasting positions on every side. No smoke, no ash on the marshmallow. Sticks above the flame tips and sugar drips kept off the fire glass — those are the only rules.
Any hope of installing under a roof?
Only inside the spec sheet’s clearance and ventilation limits, confirmed against local code — the Triple-S sends heat up from the entire pan area, not one point. Open-air placement is the low-friction route; covered plans need your gas professional’s sign-off first.