
8-inch wide flat pan with brass linear bullet burner: a slim brass-tipped flame line, 24 to 96 inches
The Outdoor Plus 8 inch wide rectangular flat pan and brass linear bullet burner is a slim, USA-made trough burner. The rimless stainless steel plate lies over your enclosure beneath lava rock or fire glass. It’s 8 inches wide and 24 to 96 inches long. A centered straight tube has upright brass bullet ports for a tall flame along its full length.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Prefer stainless ports? See the 8-inch flat pan with stainless linear bullet burner. The 8 inch brass linear bullet set ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Flat Pan and Linear Bullet Burner – Spec Sheets
SKU: OPT-BFP24RT | OPT-BFP36RT | OPT-BFP48RT | OPT-BFP60RT | OPT-BFP72RT | OPT-BFP84RT | OPT-BFP96RT
| Size |
24″ x 8″, 36″ x 8″, 48″ x 8″, 60″ x 8″, 72″ x 8″, 84″ x 8″, 96″ x 8″ |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
| Materials |
Brass, Stainless Steel |
FAQ
What is a bullet burner on this 8-inch flat pan set?
Instead of plain drilled holes, the brass linear bullet burner uses raised, machined bullet ports that throw a taller, crisper flame and resist clogging from fire glass dust and moisture. Across the 8-inch wide flat pan it reads as one clean ribbon of fire down the whole length.
Which lengths does the brass linear bullet set come in?
Seven lengths, all 8 inches wide: 24, 36, 48, 60, 72, 84 and 96 inches, SKUs OPT-BFP24RT through OPT-BFP96RT. Measure your finished opening before ordering — the flat pan rests on top of the enclosure, so it needs solid bearing on all sides.
Can I get this set with electronic ignition?
Yes. Beyond basic match lit, the OPT-BFP series is offered with Match Lit with Flame Sense (LC certified), Flame Sense with Spark, Low Voltage Electronic (CSA certified), or Plug and Play (CSA certified). Choose the ignition when you order — it is built into the pan, not added later.
Why choose the brass burner over stainless?
Brass is the longevity pick. It is denser than stainless and highly corrosion resistant, so it shrugs off coastal salt air and pool chemistry that slowly pit steel. If the feature sits near saltwater or you simply never want to think about the burner again, the brass bullet ports earn their price.
How do I build a fire pit around a flat pan like this?
Frame an enclosure in concrete block or steel stud, run gas to a key valve, then set the 8-inch flat pan across the opening — it is the engineered shortcut that turns plain masonry into a finished gas fire pit. Have a licensed gas professional make the final connections.
What media goes over the brass bullet burner?
About an inch of fire glass or lava rock — enough to hide the brass linear bullet ports without smothering the flame. Never substitute pea gravel or river rock; trapped moisture can cause ordinary stone to crack or pop when the burner heats up.
Can this setup run under a covered patio?
Only if the structure satisfies the clearance-to-combustibles and ventilation requirements in the OPT-BFP spec sheet and your local code — overhead height matters most. Many builders keep these 24-inch to 96-inch pans in open-air features instead. Ask your gas installer to confirm clearances before you frame anything.