12-inch wide lipless drop-in pan with H burner: a pan with no outer flange for a seamless edge, 24 to 96 inches
The Outdoor Plus 12 inch wide rectangular lipless drop-in pan and H burner fits linear fire pits. Made in the USA, the stainless pan’s straight walls have no outer flange, sitting flush so stone or tile meets the fire without exposed metal. Two long drilled tubes join centrally in an H, spreading flame evenly along both sides. Lengths are 24, 30, 36, 42, 48, 60, 72, 84, or 96 inches.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Prefer a finished metal border? See the raised lip pan with H burner. The 12 inch lipless H burner set ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Lipless Rectangular Drop in Pan & SS H Burners – Specification Sheets
SKU: OPT-LTRCT2412 | OPT-LTRCT3012 | OPT-LTRCT3612 | OPT-LTRCT4212 | OPT-LTRCT4812 | OPT-LTRCT6012 | OPT-LTRCT7212 | OPT-LTRCT8412 | OPT-LTRCT9612
| Size |
24″ x 12″, 30″ x 12″, 36″ x 12″, 42″ x 12″, 48″ x 12″, 60″ x 12″, 72″ x 12″, 84″ x 12″, 96″ x 12″ |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
Why choose the 12-inch lipless pan over the raised lip version?
Aesthetics run opposite directions: the raised lip frames the fire with visible metal; this lipless pan disappears entirely, letting tile or stone run flush to a wide sunken bed with the H burner rising from it. Choose lipless when the design should show fire and finish — and no hardware.
What is the size ladder for this set?
Nine lengths at 12 inches wide: 24, 30, 36, 42, 48, 60, 72, 84 and 96 inches — OPT-LTRCT2412 through OPT-LTRCT9612. Because the pan sets flush during construction, order the exact size before the surround is built, not after.
What fuel does the lipless H burner set run on?
Whichever you order — every 12-inch lipless H set is factory-built for natural gas or liquid propane. In a flush masonry install the gas decision is effectively permanent, so confirm the property’s supply with your installer before purchase. Flame performance is equal on both.
How far from the house wall can we run this?
Follow the OPT-LTRCT spec clearances and local code — linear features often run along outdoor kitchens and walls, but siding, windows and eaves each have minimum distances. Because a lipless pan is built into the structure, get placement signed off before construction, not at inspection.
Is marshmallow roasting still on the table with a flush burner?
Definitely — the H burner’s clean gas flame toasts marshmallows smoke-free across the full 12-inch bed. The flush surface even makes a convenient staging ledge for graham crackers, just outside the hot zone. Keep drips off the glass and sticks above the flame tips.
Could this be the fire element in a built-in dining table?
It is the premium way to do it: the pan vanishes under the table finish and a trench of H-burner flame runs the centerline — the detail that makes a masonry fire pit table look monolithic. Use the 60-inch or longer sizes for dining scale.
Can we cook over the flush-mounted flame?
Treat it as ambiance. Grease from real cooking fouls the media bed and the H burner ports, and a flush install makes cleanup harder than on a removable pan. S’mores are fine; steaks belong on a grill. The OPT-LTRCT stays beautiful when it stays ornamental.