DuraVent DirectVent Pro 30 Degree Elbow: a gentle turn around framing
The DuraVent DirectVent Pro 30 Degree Elbow is a vent fitting that makes a shallow turn around framing. It is the gentlest bend in the line. Two together can shift the pipe sideways around a stud, joist, or header, then return it to its original direction. The base swivels so you can aim the elbow while its twist lock remains engaged. The bend itself stays at 30 degrees. DirectVent Pro is DuraVent’s pipe inside a pipe vent for direct vent gas fireplaces and stoves: exhaust goes out through the inner pipe and outside air comes in through the outer pipe.
Choose the 4 by 6 5/8 inch or 5 by 8 inch size to match your vent run. This elbow comes in galvanized steel only, with no black finish available. Your appliance maker sets the allowed number of elbows. Too many turns, long sideways runs, and pipe exposed to outdoor cold can let exhaust moisture collect and corrode vent parts. Need a sharper turn? Where possible, DuraVent recommends using 45 degree elbows rather than 90 degree elbows. See the DuraVent DirectVent Pro 45 Degree Elbow. The DuraVent DirectVent Pro 30 Degree Elbow ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

















































