DuraVent FasNSeal Wall Bracket: weight support for a vertical vent or tee
The DuraVent FasNSeal Wall Bracket is a support that attaches a vertical vent or tee to the building. It carries the pipe’s weight and keeps it the proper distance from the wall. FasNSeal is DuraVent’s stainless steel vent for high efficiency gas boilers, furnaces, and water heaters, built to carry pressurized exhaust and its acidic condensate outside. DuraVent requires this bracket after a turn upward into a vertical run of 10 feet or more, at every 12 feet of vertical run, and after any offset, where the vent shifts sideways.
Choose a 3 to 16 inch size to match your vent. The bracket attaches to a solid part of the building. Fasteners suited to masonry, wood, or steel are purchased separately. A roof vent must finish at least 2 feet above the roof and higher than any wall within 8 feet. More support is needed when it extends over 6 feet above the roof. FasNSeal vent joints seal with a gasket and a built in locking band. Using double wall vent? See the DuraVent FasNSeal Wall Bracket for W2. The DuraVent FasNSeal Wall Bracket ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.








Commercial projects may require custom parts and unique system designs. Duravent offers complete project assistance:








































