Harvia Virta HL110E: a 10.5 kW sauna heater for rooms from 177 to 635 cubic feet
The Harvia Virta HL110E is the largest home size in the Virta line, a floor-standing electric sauna heater rated at 10.5 kW for rooms from 177 to 635 cubic feet. Its black steel column is about 16 inches square and 33 inches tall, a little deeper than the smaller Virta heaters to hold 150 pounds of stones. It weighs 55 pounds empty and stands against a side wall or in a corner. The stones sit directly on stainless steel heating elements that can be serviced in place.
You get the heater and its manual. It needs a Harvia Xenio wall control to run, and you add that on the page. Sauna stones are sold separately, so add the 4 boxes it needs on the page. A bucket and ladle set is optional. Want steam and fragrance too? The Harvia Virta Combi HL110SA adds a built-in steamer at the same power. The Harvia Virta HL110E ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
FAQ
What size sauna room is this heater rated for?
The Virta HL110E is a 10.5kW electric heater rated for sauna rooms from 177 to 635 adjusted cubic feet, which is why Harvia recommends it for medium to large saunas and for frequent, long sauna baths. If your room falls near either end of that range, confirm the adjusted-volume calculation with the installation manual linked on this page before choosing a size.
Does this heater come with its own controls?
No. This heater has no built-in controls and requires a Harvia Xenio digital control to operate. The required Xenio control is offered right on this page under Required: Sauna Heater Controls, so you can add it to your order along with the heater instead of sourcing it separately.
Are sauna stones included with the heater?
The box contains the sauna heater and the installation and operation manual, and stones are required for operation. You add the required stone boxes to your order using the Required Stones selector on this page. Harvia notes that heater stones are significant to the unit’s safety, and proper stone maintenance by the owner is required for the warranty to remain valid.
Can you pour water on the stones for steam?
Yes. The Virta is a stone-filled heater built for the traditional sauna experience, with direct rock-to-heating-element contact that keeps the stones hot for steam. A bamboo and aluminum sauna bucket with ladle is offered as an optional add-on on this page, and the installation and operation manual covers water use.
What are the electrical requirements?
The specifications list 240V single-phase power with a nominal draw of 43.75 amps. An electric sauna heater must be hard-wired by a licensed electrician following the installation manual and your local electrical codes, which determine the correct breaker and wire sizing for the circuit.
Where can the heater be installed in the sauna?
This is a floor-mounted heater designed for sidewall or corner placement inside the sauna. The stainless steel body measures 16 inches wide by 13 inches deep by 33 inches tall, part of the floor-standing Harvia Virta series. For the required clearances around the unit, follow the installation manual linked on this page.
How does delivery work for a heavy item like this?
The heater ships by freight on a wooden pallet, with delivery scheduled by special appointment. The driver provides curbside delivery only and will lower the shipment to ground level. Before the order ships, the store contacts you to share shipment details and discuss anything about your location that could complicate the delivery.
Shipping
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.