Monessen Lanai See-Through: one outdoor fire shared by two seating areas
The Monessen Lanai See-Through is an outdoor linear gas fireplace for a patio wall. Linear means the opening is low and wide, like a letterbox. It comes 48 or 60 inches wide, with a fire window 17 inches tall on each side. Pick the size on the page. Two seating areas share a ribbon of flame over colored crushed glass. Stainless steel reflects the fire, and LED lights offer eight colors. Your contractor frames a structure around it on the patio and finishes it in stone, stucco, or brick.
Order it for natural gas or propane. It needs no vent or chimney, so it can go in a garden wall, a patio wall, or an outdoor kitchen. IntelliFire ignition lights it with a button, so no pilot burns while the fire is off. It puts out from 55,000 to 65,000 BTU, real warmth for both seating areas. On the page you pick the size, the fuel, and the glass color. You can add stainless steel screens and clean face trim kits (a black frame that goes around the opening) for one or both sides, a stone kit, or driftwood logs. Only need one viewing side? See the Monessen Lanai gas fireplace. The Monessen Lanai See-Through ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Features
Monessen Lanai See-Through Fireplace
Light up your landscape with our best and brightest, the Lanai linear outdoor gas fireplace. The night comes alive with glowing flames and a colorful crushed glass firebed reflected in stainless steel as you create a contemporary vibe to your outdoor space.
Key Features:
- Modern linear design in 48″, 60″ and stunning 48″ double-sided models
- LED lighting in eight colors (choose one or cycle) and three intensity levels
- Stainless-steel interior to reflect and magnify the flames
- Durable with rust-resistant, stainless-steel construction
- IntelliFire® ignition system with wall control constantly monitors ignition and ensures safe functioning Weatherproof wall control to run your fireplace and change LED colors
- No chimney or venting needed, blends anywhere into your space
- Glass wind guard to keep flame pattern steady and strong Optional features
- Add a layer of safety with an optional screen to protect and prevent debris from entering the fireplace
- Add optional ceramic stone or driftwood logs for a touch of customization
- Ensure even longer life with a drain pan that moves moisture away from the fireplace
Specifications
ODLANAIGST-48 | 652174951390
Model : Lanai 48 See-Through Outdoor Gas Fireplace
Framing Width : 52-1/8″
Framing Depth: 11-5/8″
Framing Height : 39-3/4″
BTU/hr Input : 55,000
Viewing Area : 47-7/8 x 17″
FAQ
How do you finish the edges where the fireplace meets the wall?
With the factory kits made for this model. Monessen offers overlay kits and a trim kit for the Lanai 48 See-Through, so both finished faces get a clean, intentional border where metal meets stone or stucco instead of an improvised caulk line. On a fireplace you view from two sides, that edge detail matters twice.
Does the double-sided Lanai come in a 60-inch width?
No. The double-sided model is built in the 48-inch width only, model ODLANAIGST-48; the wider 60 belongs to the single-sided branch of the family. Monessen bills this one as its best and brightest among see-through fireplaces, so a two-faced installation means designing the wall around the 48 from the start.
What does the 304 on the stainless spec actually mean?
It names the grade of the stainless steel, and grade matters outdoors. Monessen builds this fireplace from rust-resistant 304 stainless, an alloy specified because it weathers any climate season after season. The number is the difference between metal that stays handsome through coastal air and freeze-thaw winters and metal that merely started out shiny.
How does the flame move across the firebed?
As one continuous ribbon. The fire runs the full length of the bed, reading as a single end-to-end line of flame rather than a cluster in the middle, and that linear composition holds from multiple angles around the space. It is a deliberately architectural way to present fire, closer to a lit horizon than a campfire.
What does the 48 in a 48-inch fireplace actually measure?
The nominal width, roughly the flame window. The true viewing area here is 47-7/8 by 17 inches, while the structure itself frames at 52-1/8 inches wide and 39-3/4 inches high. Plan the wall around the framing numbers and reserve the 48 for describing the fire; ordering by nominal size alone is how surrounds end up rebuilt.
Can a designer get exact drawings before the wall is built?
Yes. Monessen publishes architect guides and CAD drawings for the Lanai 48 See-Through, so the fireplace can be drawn into a wall or outdoor room at the documentation stage rather than measured on site later. For a unit that shows two finished faces, working from the actual drawings keeps both sides honest.
Is the Vesper a better fit for a rustic backyard?
Often, yes. The Vesper is the traditional player, an open brick-lined firebox with log-and-brick character. This Lanai is its opposite number: contemporary, linear, presenting a modern line of fire to each face of the wall it occupies. Match the fireplace to the architecture around it and the choice usually makes itself within a weekend of sketching.