Real Fyre Golden Oak Designer: a vent free gas log set with golden oak coloring
The Real Fyre Golden Oak Designer is a vent free gas log set. Its Designer finish pairs golden oak coloring with detailed bark. The wood fire look suits a traditional room. It is vent free, which means the burner burns clean enough to run with the damper closed, so the heat stays in the room. It still goes inside a real fireplace, and vent free logs are not allowed everywhere, so check your local code first. It comes in 20, 24, or 30 inch sets. Measure your firebox at the front, at the back, and front to back, and if you land between two sizes, take the smaller set.
Each log is molded from a real piece of wood, cast in a ceramic made for high heat with a steel rod inside, and painted by hand. The price is for the logs only. On the page you pick natural gas or propane and add the G9 burner; a 24 inch see through version for a fireplace open to two rooms is on the page too. You also pick how it lights: with a manual control, with an on and off remote, or with a remote that sets the flame height. The see through version uses an on and off remote only. A reflective panel brightens the ember bed, with lava granules, embers, and glowing coals in the box. Heat output ranges from 21,000 to 36,000 BTU depending on size and fuel. A Fyreback, a steel panel that stands behind the fire, is optional. Want another oak look? See the Real Fyre Meadow Oak vent free gas log set. The Real Fyre Golden Oak Designer ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: RD9-20 | RD9-24 | RD9-30 | RD9-2-24
PRODUCT SIZES
- 20 Inch Burner
- 24 Inch Burner
- 30 Inch Burner
BURNER
Vent-Free Burner Sizes and BTU Ratings
BTU Rating = BTU x 1000
BTU Rating = BTU x 1000 (G8E-16″ = 20,000 BTUs)
FAQ
What earns the Golden Oak Designer its name?
Hand craft. As part of Real Fyre’s Designer line, the RD9 logs are finished as hand-painted originals, with golden oak coloring and bark detail layered on by an artist rather than stamped on. The result is a vent-free set with the painterly depth people usually expect from display-grade vented logs.
How many versions of the RD9 exist?
Four SKUs: RD9-20, RD9-24, and RD9-30 for standard fireboxes, plus the RD9-2-24, a 24-inch see-thru arrangement for two-sided openings. Pick by firebox measurements, front width, back width, and depth, and step down a size if you measure between sets.
What burner sits under the Designer logs?
The G9 vent-free system, running 21,000 to 36,000 BTU across its sizes in natural gas or propane, with an innovative reflective panel that amplifies the ember bed’s glow. Lava granules, embers, and Bryte Coals ship with the unit. The rest of the G9 Series shares the platform.
Are vent-free log sets allowed everywhere?
No. A handful of jurisdictions restrict or prohibit vent-free appliances, and requirements shift by state and municipality. Before ordering an RD9, have your dealer or installer confirm the local codes for your address. Where vent-free is permitted, the installation itself is straightforward.
How should I clean hand-painted logs?
Gently. Vacuum the RD9 logs with a soft brush attachment once or twice a season and leave it there: no scrubbing, no household cleaners, nothing abrasive that could lift the hand-applied finish. The ember materials can be freshened separately whenever they start to dull.
Will it actually warm the room, or is it just pretty?
Both, genuinely. The RD9 is a vent-free heater, so its output warms the space directly instead of escaping up a flue, and the ceramic logs keep radiating after you shut the gas off. The Designer finish simply means it looks like fine art while doing it.
What is the routine for lighting the G9?
Follow the G9 instruction sequence: the self-contained valve lights and adjusts from the burner controls, with no household wiring involved. Have the installer demonstrate the first fire on your RD9, and after one walkthrough it becomes a few-second habit rather than a procedure.