
12-inch wide flat pan with H bullet burner: two full-length tubes for a wide, even flame, 24 to 96 inches
The Outdoor Plus 12 inch wide rectangular flat pan and H bullet burner spreads even flame across a long rectangular fire pit’s full width. Made in the USA, its rimless stainless steel plate sits atop your enclosure beneath lava rock or fire glass. Two full-length tubes connect at the middle in an H, with upright bullet ports lifting flames higher than drilled tubes. Sizes run 24 to 96 inches long by 12 inches wide.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Prefer brass ports? See the 12-inch flat pan with brass H bullet burner. The 12 inch H bullet set ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Flat Pan and H Bullet Burner – Spec Sheets
SKU: OPT-BFP1224RSS | OPT-BFP1236RSS | OPT-BFP1248RSS | OPT-BFP1260RSS | OPT-BFP1272RSS | OPT-BFP1284RSS | OPT-BFP1296RSS
| Materials |
Brass, Stainless Steel |
| Size |
24″ x 12″, 36″ x 12″, 48″ x 12″, 60″ x 12″, 72″ x 12″, 84″ x 12″, 96″ x 12″ |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
What do bullet ports add to an H burner?
Definition. The stainless H frame spreads fire across the 12-inch pan the way any H does, but each machined bullet port fires a distinct, crisp jet — so instead of a soft blur you get a field of sharp flames. It also resists clogging from media dust better than drilled holes.
Give me the size run for this set.
Six lengths on the 12-inch wide flat pan: 24, 36, 48, 60, 72, 84 and 96 inches — OPT-BFP1224RSS through OPT-BFP1296RSS. Like the rest of the bullet line it skips 30 and 42-inch steps, so confirm the opening dimension before the mason builds.
Is the burner brass or stainless here?
This is the stainless steel execution — the RSS suffix in OPT-BFP1224RSS marks it. The same H bullet design also exists in brass for buyers near saltwater. Stainless is lighter on the budget, visually cooler-toned, and needs nothing beyond occasional debris clearing.
Could the finished feature live on a wood deck?
With the right engineering, yes: a non-combustible enclosure, the spec sheet clearances respected, and heat shielded from deck framing. Because the H bullet set burns gas, there are no embers to worry about — the concern is radiant and conducted heat, which your installer can design around.
What is the build sequence for a fire pit around this pan?
Pick the OPT-BFP12 length, frame a matching enclosure, run gas to a key valve, set the flat pan on top and add media — the component recipe behind every custom gas fire pit. The pan is the engineered part; the surround is just masonry.
Do I pick natural gas or propane at checkout?
Yes — each 12-inch H bullet set is factory-built for the fuel you specify, natural gas or liquid propane. Field conversion is not the intent, so match the order to what your property runs. Flame character from the bullet ports is equally sharp on both fuels.
Will a rainstorm hurt the burner?
No. Stainless pan, stainless H bullet burner — weather is part of the job description. Water sitting in the ports just makes the first light sputter, so give it a short burn to dry out. A cover between uses keeps the 12-inch media bed free of leaves.