
Designer Series Scupper 14: an urn of flame with a curved scupper that arcs water into the pool
The Outdoor Plus Designer Series Scupper 14 is an urn-shaped fire and water sculpture in powder-coated metal. Flame burns on lava rock across its open top. A glossy curved front scupper sends one wide arc of water down into the pool, with fire above and water below. Built to order in the USA, it comes in your choice of 15 powder-coat colors.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Your pool builder plumbs the water and gas lines. Want the same idea in a taller vase shape? See the Designer Series Scupper 13. The Designer Series Scupper 14 ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
The Designer Series Scupper 14 presents an extraordinary visual drama where the vivacious play of fire crowns the cool cascade of water. Crafted with precision, the scupper’s elegant water flow is juxtaposed against the vibrant backdrop of flames, creating a mesmerizing spectacle that captures the essence of fire and water in harmony.
SKU : OPT-DSF14
| Ignition Type |
Match Lit Ignition, Low Voltage Electronic Ignition (CSA Certified) |
| Fire Tower Color |
Black (-BLK), Bronze Hammertone (-BZHT), Copper Vein (-CPV), Gray (-GRY), Java (-JAV), Mist (-MST), Olive Green (-OGR), Onyx Black (-ONX), Pewter (-PEW), Sapphire Blue (-SBL), Silver Vein (-SLV), Soft White (-STW), White (-WHT), White Vein (-WHTV) |
| Water Tower Color |
Black (-BLK), Bronze Hammertone (-BZHT), Copper Vein (-CPV), Gray (-GRY), Java (-JAV), Mist (-MST), Olive Green (-OGR), Onyx Black (-ONX), Pewter (-PEW), Sapphire Blue (-SBL), Silver Vein (-SLV), Soft White (-STW), White (-WHT), White Vein (-WHTV) |
| Gas Type |
Liquid Propane, Natural Gas |
FAQ
What is the visual idea behind Designer Scupper 14?
Fire crowning water – the flame sits as the crest above a cool cascade falling beneath it, a vertical composition where the two elements frame each other rather than compete. Scupper 14 is the most theatrical stack in the Designer Series lineup.
How do the two-tower color options work on OPT-DSF14?
You pick a finish for the fire tower and another for the water tower, each from 15 powder coat colors spanning Black, Java, Pewter, Soft White, Sapphire Blue, and more. Two-tone builds – say a White Vein water tower under an Onyx Black fire tower – are where the DSF14 shines.
What are the ignition and fuel specifics?
Match lit or CSA-certified low voltage electronic ignition, and factory configuration for liquid propane or natural gas chosen at purchase. Full dimensions and mounting requirements are on the Scupper 14 specification sheet – or ask us and we will confirm fit for your wall.
Can the cascade run without the flame above it?
Yes – Scupper 14 keeps water and gas on separate feeds and controls, so the cascade can run through swim hours with the burner cold, then the flame joins for evenings. Neither element ever depends on the other being on.
Where does a piece like this get mounted?
On a raised pool wall, spa wall, or fountain wall with a basin below to catch the cascade. The DSF14 also anchors non-pool water walls in courtyards. If you are comparing formats, wall scuppers give height where a fire bowl gives mass – many projects use both.
Is powder coat tough enough for a wet, hot location?
That is its specialty – electrostatically applied and oven-cured, the DSF14’s finish resists chlorinated splash, UV, and burner heat far better than paint. Rinse off mineral deposits occasionally and the color holds for years, on both towers.
Who handles installing the Scupper 14 wall feature?
A pool or water feature contractor builds the wall with water feed and mounting, and a licensed gas professional runs and tests the fuel line. Plan Scupper 14 into the wall design early – hiding the utilities inside the structure is what makes the finished piece look effortless.