
Square drop-in pan with brass triple S bullet burner: three curved arms with brass ports, 12 to 48 inches
The Outdoor Plus square drop-in pan and brass triple S bullet burner is the brass-tipped swirl burner for a square fire pit with a lipped opening. The stainless pan hangs from its lip inside the enclosure and holds lava rock or fire glass. Three S-shaped arms curve from a center hub, with upright brass bullet ports that lift the flame taller than a drilled tube. Made in the USA in 12 to 48 inches square.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Prefer stainless ports? See the square drop-in pan with stainless triple S bullet burner. The square brass triple S bullet set ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Square Drop In Pan & Triple S Bullet Burner – Specification Sheets
SKU: OPT-BP12SD | OPT-BP18SD | OPT-BP24SD | OPT-BP30SD | OPT-BP36SD | OPT-BP48SD
| Materials |
Brass, Stainless Steel |
| Size |
12″, 18″, 24″, 30″, 36″, 48″ |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
Why order the square drop-in Triple-S in brass?
Because recessed burners live in the dampest microclimate a fire feature has, and brass treats that as a rounding error. The three S-curved arms of bullet jets swirl inside the sunken square bed exactly like the stainless version — the OPT-BP-SD simply guarantees they still will in twenty years.
What is the size ladder here?
Six squares: 12, 18, 24, 30, 36 and 48 inches — OPT-BP12SD through OPT-BP48SD. The 12-inch is the smallest Triple-S TOP makes in a square drop-in, a jewel-box option for column tops. Materials pair the brass burner with a stainless pan.
Which ignition options can I specify?
Match lit pan-and-burner, Match Lit with Flame Sense (LC certified), Flame Sense with Spark, Low Voltage Electronic (CSA certified) and Plug and Play (CSA certified), each configured at the factory to your order.
How does this become a finished fire pit?
Build the square surround, cut the opening to the spec sheet, seat the pan on its rim and run gas to a key valve — the component skeleton beneath every custom gas fire pit. The brass arms rise from the sunken glass; a licensed fitter handles fuel and testing.
Does weather sitting in the sunken pan hurt the brass?
No — tolerance for exactly that is why brass was specified. Rainwater in the recessed OPT-BP12SD bed evaporates or drains without consequence; give the ports a short drying burn before the next crisp light, and cover between uses to keep leaves out.
How many marshmallow stations does a square Triple-S support?
All four sides — the three swirling arms push clean gas flame toward every edge of the square, so a 30-inch set keeps a family roasting simultaneously without crowding. Sticks above the jets, drips off the glass, and the brass stays flawless.
Can we run it under the eaves of the house?
Only within the spec sheet’s clearance and ventilation limits, checked against local code — eaves sit exactly where a full-pan burner sends its heat. Pull the feature into open air where possible; where it is not, your gas professional rules on the numbers before anything is built.