Square drop-in pan with square bullet burner: a lipped pan and a double square ring of tall flame, 12 to 48 inches
The Outdoor Plus square drop-in pan and square bullet burner gives square fire pits full, even, tall flames. Its brushed stainless pan’s lip rests on the opening’s rim, suspending it inside to hold lava rock or fire glass. Upright bullet ports on an outer square ring and smaller inner loop create taller flames than drilled tubes. Made in the USA in 12, 18, 24, 30, 36, or 48 inches square.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. For top mounting, see the square flat pan with square bullet burner. The square drop-in pan and square bullet burner ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: OPT-BP12SQDSS | OPT-BP18SQDSS | OPT-BP24SQDSS | OPT-BP30SQDSS | OPT-BP36SQDSS | OPT-BP48SQDSS
| Size |
12″, 18″, 24″, 30″, 36″, 48″ |
| Ignition Type |
Pan & Burner Only (Match Lit), Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
What does the square bullet burner bring to a drop-in pan?
A sunken frame of jets: the stainless square ring, lined with machined bullet ports, sits recessed so a crisp perimeter of flame rises from below the finished surface. It is the sharpest-edged look in the square drop-in family — geometry answered with geometry.
What sizes are in the OPT-BP-SQDSS line?
Six squares: 12, 18, 24, 30, 36 and 48 inches — OPT-BP12SQDSS through OPT-BP48SQDSS. Rim-supported drop-ins, with cut-out dimensions per size on the spec sheet. The 12-inch frame is a striking accent at column scale.
Which ignition tiers can it ship with?
Match Lit, Match Lit with Flame Sense (LC certified), Flame Sense with Spark, Low Voltage Electronic (CSA certified) and Plug and Play (CSA certified). One touch of a lighter carries flame around the whole perimeter on the match lit tiers.
How does heat distribute from a perimeter of jets?
Evenly outward on all four sides — the frame pattern means every seat around the feature faces flame directly, and output scales from the modest 12-inch to the commanding 48-inch. Spec sheet ratings per size guide your installer’s line sizing and your seating plan.
What is the build sequence around this pan?
Surround first, pan last: construct the square enclosure, cut the spec-sheet opening, run gas to a key valve, then seat the OPT-BP-SQDSS on its rim and add media — the standard component path to a custom gas fire pit. Licensed hands on the fuel side, non-negotiably.
Fire glass depth in the sunken frame — how much?
Floor the bed and stop short of the bullet tips, so the square of jets fires above a level field of glass. Overfilling is the one common mistake with bullet lines — it muffles exactly the crispness you bought. Start shallow; top up later if wanted.
Can we do s’mores over the square frame?
Yes, and unusually democratically — the perimeter flame gives each side of the feature its own roasting front, so nobody leans over anyone. Clean gas, no smoke in eyes. Sticks above the ports, sugar off the media, and the sunken pan wipes clean when cool.