
Square flat pan with square bullet burner: a rimless plate and a double square ring of flame, 18 to 60 inches
The Outdoor Plus square flat pan and square bullet burner brings even, full flames to square fire pits you build yourself. Made in the USA, its rimless stainless steel plate spans the enclosure’s top beneath lava rock or fire glass. Sizes run 18 to 60 inches square. Upright bullet ports line its outer square ring and smaller inner loop, lifting flames higher than drilled tubes.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. Does your opening have a supporting lip? Consider the square drop-in pan with square bullet burner. The square flat pan and square bullet burner ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
SKU: OPT-BFP18SQSS | OPT-BFP182SQSS | OPT-BFP24SQSS | OPT-BFP30SQSS | OPT-BFP36SQSS | OPT-BFP48SQSS | OPT-BFP60SQSS
| Size |
18″ x 18″, 24″ x 24″, 30″ x 30″, 36″ x 36″, 48″ x 48″, 60″ x 60″ |
| Ignition Type |
Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
FAQ
What is a square bullet burner?
The pan’s geometry, weaponized: a stainless square ring lined with machined bullet ports, so a frame of crisp jets traces the perimeter of the square flat pan. It sharpens the classic square-on-square look — same symmetry, far more defined flame, better clog resistance.
What sizes does the OPT-BFP-SQSS line include?
Spec sheet sizes run 18 by 18 up to 60 by 60 inches — 18, 24, 30, 36, 48 and 60 — under SKUs OPT-BFP18SQSS through OPT-BFP60SQSS. The 60-inch square is one of the largest flat-pan footprints TOP offers; verify your cap can carry it.
Which ignition tiers are available?
Match Lit, Match Lit with Flame Sense (LC certified), Flame Sense with Spark, Low Voltage Electronic (CSA certified) and Plug and Play (CSA certified). A perimeter of bullet ports lights from any single point and carries around the square quickly.
Can the feature be built over a wood deck?
With engineered protection, yes — non-combustible enclosure, spec clearances, and shielding between the pan and deck structure. No embers with gas; the design problem is purely radiant heat from four sides of jets, and installers solve it routinely on the smaller squares especially.
What is the path from this pan to a working fire pit?
Frame a square surround, support the cap, cut to the pan size, set it on top, connect gas to a key valve — the component route that underlies every custom gas fire pit. Licensed professionals handle fuel and testing; you handle the stone.
How do I shut off the square bullet burner flame?
Close the key valve or flip the electronic control and the entire square frame of jets cuts out at once — nothing smolders, nothing needs water. Let the OPT-BFP-SQSS pan cool before covering, and the media bed is ready for the next evening as-is.
S’mores around a perimeter burner — does it work?
Wonderfully — the square frame of jets gives every side of the feature its own roasting front, so a 36-inch pan hosts four marshmallow stations at once. Clean gas flame, no smoke chase. Keep sticks above the ports and drips off the glass.