Valcourt St-Louis Wood Fireplace

$8,414.00

✓ Free Shipping
✓ No Sales Tax (except WY)

✓ 100% Price Match Guarantee

Valcourt LogoAuthorized Dealer – Full Warranty Included

Faceplate *

Tall Faceplate (84 1/4") With Integrated Gravity Air Distribution Kit - VA19FL06

Options

5"Ø Air Intake Termination With Clamps - AC01297 (+$66.00)
5"Ø X 10' Insulated Flex Pipe For Fresh Air Intake - AC02093 (+$75.00)
5"Ø X 25' Insulated Flex Pipe - AC02094 (+$165.00)
5''Ø Fresh Air Intake Register With Airtight Damper - AC01349 (+$285.00)
6"Ø X 25' Insulated Flex Pipe For Forced Air Kit - AC01350 (+$225.00)
Fireplace Carrying Handles - AC09200 (+$100.00)
Forced Air Kit - VA4460 (+$760.00)
Tempered Glass Hearth Pad 10 mm - 20" X 70" - AC02761 (+$549.00)
Product price: $8,414.00
Total options:
Order total:

Valcourt St-Louis: the most heat of any Valcourt wood fireplace

The Valcourt St-Louis is a wood burning fireplace that heats the house. Valcourt rates it for 1,000 to 2,400 square feet, so it can heat a large open area or most of a house. Its tall black face surrounds a wide single glass door with a handle you take off. It is a zero clearance fireplace, which means your builder frames it into a wall during construction or a renovation. A chimney runs up from it, so you do not need a masonry fireplace.

Load it up and turn the air down, and it burns up to 7 hours. At full burn it puts out up to 100,000 BTU. The blower, a quiet fan that pushes the heat out into the room, comes with it. It runs its own fire. NexFlame, Valcourt’s self adjusting air control, holds a steady clean burn on its own, in a thermostat mode or by hand. A web app lets you check on the fire from your phone. It meets the current EPA clean air rules. It burns dry, seasoned firewood. The faceplate is the finished frame around the opening, and this one is the tall panel that carries the warm air grilles, so the warm air rises out into the room on its own. It is part of the price, and the page asks you to confirm it. You can add a forced air kit that ducts some of the heat to another room or a glass hearth pad that protects the floor in front, and more on the page. Want longer burns? See the Valcourt Waterloo wood fireplace. The Valcourt St-Louis ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.

Specifications

SKU: FP19

Appliance performance (1)

Fuel type : Dry cordwood (16″ recommended)
Recommended heating area-ft² : () 1,000 – 2,400
Overall firebox volume-ft³ : 3.15
EPA loading volume-ft³ : 1.9
Maximum burn time : () 7 h
Maximum heat output-dry cordwood : (2) 100,000 BTU/h
Overall heat output rate < : (2) (3) 29,457 BTU/h (8.63 kW) to 93,725 BTU/h (27.47kW)
Average overall efficiency (dry cordwood) : (3) 76% (HHV) (4) (LHV) (5)
Optimum overall efficiency : (6) (7) 78%
Optimum heat transfer efficiency : (8) 80%
Average particulate emissions rate : (9) 1.8 g/h
Average CO : (10) 1.3 g/min

General features

Spec Value
Combustion technology Non-catalytic
High-efficiency certified appliance Yes, EPA 2020 approved
Maximum log length 21″
Log positioning Loading over width
Chimney diameter 8″
Flue outlet diameter 8″
Type of chimney CAN/ULC S604, UL 103 (1700 °F) – CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet) 15′
Baffle type C-Cast or equivalent
Approved for a mobile home installation Yes, only in Canada
Door type Single, glass with steel frame
Safe and removable handle Yes
Glass type Ceramic glass
Glass air-wash system Yes
Premium quality blower included (CFM) 176
Overall dimension (Height) 84 3/8″
Overall dimension (Width) 57 5/8″
Overall dimension (Depth) 28″
Door opening – dimension (Height) 11 1/2″
Door opening – dimension (Width) 26 3/8″
Firebox – dimension (Height) 16 1/8″
Firebox – dimension (Width) 23 3/8″
Firebox – dimension (Depth) 13 3/4″
Moulded refractory bricks Yes
Stainless-steel secondary-air system improving gas combustion Yes
Thermostatic or manual mode Yes
USA standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL127
Canadian standard (safety) ULC-S610
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

Approved chimney types

Manufacturiers* Brand Type Diameter
American Metal HSS AC Triple Wall 8″ (20 cm)
American Metal HS AC Triple Wall 8″ (20 cm)
DuraVent Dura Tech 1″ Solid Pack 8″ (20 cm)
DuraVent Dura Tech Canada DTC 1″ Solid Pack 8″ (20 cm)
DuraVent Dura Tech Premium 2″ Solid Pack 8″ (20 cm)
DuraVent Dura Plus HTC 2″ Solid Pack 8″ (20 cm)
DuraVent Dura Plus AC Triple Wall 8″ (20 cm)
Metal Fab Temp Guard 1″ Solid Pack 8″ (20 cm)
Olympia Chimney Champion Chimney System 1″ Solid Pack 8″ (20 cm)
Olympia Chimney Rockford Chimney Systems 1″ Solid Pack 8″ (20 cm)
Olympia Chimney SBI Division Venting Ventis 1″ Solid Pack 8″ (20 cm)
SBI Division Venting Nexvent 1″ Solid Pack 8″ (20 cm)
Security Chimney ASHT 1″ Solid Pack 8″ (20 cm)
Security Chimney S-2100 2″ Solid Pack 8″ (20 cm)
Selkirk Ultimate Plus 1″ Solid Pack 8″ (20 cm)
Selkirk CF Sentinel (CF) 2″ Solid Pack 8″ (20 cm)
Selkirk Super Pro 2100 (ALT) 2″ Solid Pack 8″ (20 cm)
Selkirk Super Vent 2100 (JM) 2″ Solid Pack 8″ (20 cm)

Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm)

Canada United-States
Clearance – top (measured from the platform on which the appliance is installed)** 96″ 96″
Clearance – combustible side mantle to unit 15 1/2″ 15 1/2″
Clearance – combustible side wall to unit 15 1/2″ 15 1/2″
Clearance – from the shelf to the base of the fireplace 57″ 57″
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Manuals / Catalogs

Guides

FP19 St-Louis wood fireplace install & owner’s manual (PDF – 11.6 Mo)

FP19 St-Louis wood fireplace dimensions (PDF – 0.3 Mo)

VA19FL06 – Faceplate Installation Instructions (PDF – 1.8 Mo)

FAQ

What is NexFlame technology?

The description explains NexFlame regulates the fire itself for steady, clean heat without complex adjustments, and the Specifications tab lists a thermostatic or manual mode. Control is through a web application so you can monitor performance remotely. The result is 76 percent HHV efficiency, the highest on this Valcourt page.

How much heat does it produce?

Up to 100,000 BTU per hour on dry cordwood for 1,000 to 2,400 square feet, with an overall heat output of 29,457 to 93,725 BTU per hour and 7 hour burns from a 3.15 cubic foot firebox using 21 inch logs. It is EPA 2020 approved at 1.8 grams per hour.

Why is it 84 inches tall?

The required faceplate selector supplies the tall 84-1/4 inch faceplate with the gravity air kit built in, so the fireplace face runs floor to ceiling. The description mentions an optional decorative panel extension, VA19FH06, in classic and adjustable versions to carry the line all the way up. Overall width is 57-5/8 inches.

What chimney and clearances?

An 8 inch chimney, CAN/ULC S604 UL 103 or S629 UL 103 HT, at least 15 feet, from the page’s approved list. Clearances are 96 inches to the ceiling, 15-1/2 inches to a side mantle or side wall and 57 inches from the base to a shelf. Mobile home installation is approved in Canada only.

Is a blower included?

Yes, a 176 CFM premium blower is listed, along with a safe removable handle, glass air-wash and a single steel-framed ceramic glass door. The Options selector adds 5 inch fresh air parts, a forced air kit, carrying handles and a 20 by 70 inch glass hearth pad for the floor in front.

What warranty?

Limited lifetime per the Specifications tab, with UL 127 and ULC S610 safety listings, and the page invites the first owner to register the warranty online. Browse our other wood burning indoor fireplaces if you want a more traditional face.

Shipping / Freight / Return Info

Same-Day / 24 hour shipping

Same-Day/24 hour shipping - If we have the product in stock, we can ship same day if ordered before 12pm Monday - Friday (CST).

Freight Claims Policy

Please follow these very important steps when it comes to Freight Items that are damaged or missing
  • Open and inspect the order while the delivery driver is present. If delivery driver does not provide sufficient time to do so, please notate the delivery receipt.
  • By signing the delivery receipt without noting any damage or missing items, you confirm that your order arrived complete and in excellent condition.
  • Record any damage or missing pieces directly on the delivery receipt.
  • Do not discard damaged item(s) or any original packaging. For severe damage, write “Refused due to damage” on the delivery receipt and contact us immediately.
  • Report any damage within two business days, including delivery details and photos showing the issue
  • Damaged item(s) must be returned within 30 days. Failure to return them will result in a charge to the original payment method.

Return Merchandise Authorization Policy

Please follow these very important steps when Returning Items. Contact our team.
  • Submit your return request within 30 days of delivery.
  • You will receive an email within 1-2 business days confirming whether your return request has been approved or denied.
  • Please also note that a 20% restocking fee may apply to approved returns
  • If approved, you will receive an itemized Return Authorization, return shipping labels (if requested), and detailed instructions within 1–2 business days
  • From the date this email is received, you will have 14 days to return the product.
  • Once our distributor receives and inspects the returned item(s), your refund will be issued within 1–2 weeks
  • Items returned outside of this process or time frame are not eligible for a refund.

Customer Reviews

Be the first to review this product

What Our Customers Say

Shop by Best Sellers

Fireplace

Get In Touch

Call or Text us for our Best Price

It's important to us to go above and beyond for our clients and make sure you make the right decision for your home.