
Fin Torch Head: four tapered stainless fins around a central blade, 18 inches tall
The Outdoor Plus Fin torch head is hand-crafted stainless steel, with four upright tapered fins fanning around a central vertical blade and flame rising from a central mesh burner tube. At 18 inches tall, it’s among the range’s taller heads for posts at entries, pools, or seating walls. Stainless steel withstands heat and weather.
The included Original base has a built-in needle valve for setting the flame height, fits any 2.5 inch post with hex bolts, and connects to your gas line through a 3/8 inch flared inlet. Prefer a shaded cone to open fins? See the Cone torch head in copper. The Fin torch head ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
Fin Torch Head | Specifications
Quick Specs:
Original Top Torch Powder Coat | OPT-TT28M | Height: 18″
Each of our TOP Torches are individually hand crafted. Each torch is made from high grade stainless steel for durability against heat & natures elements.
Original TOP Torches: Built-in Needle valve for precise flame adjustment, torches can be fitted onto any 2 1/2″ post with hex bolts, 3/8″ flared gas inlet.
SKU: OPT-TT28M
| Torch Base Type |
Original TOP Torch Base |
| Finish |
Stainless Steel |
FAQ
What is the Fin Torch Head’s design story?
A single sculpted fin – a tall blade-like form that stretches the flame visually to 18 inches of height, four inches taller than TOP’s standard torch heads. The Fin (OPT-TT28M) reads like modern sculpture by day and a knife of light after dark.
What are the Fin torch’s specs and SKU?
SKU OPT-TT28M: an 18-inch-tall head, individually hand crafted, offered on the Original TOP Torch base in stainless steel. It carries the line’s standard hardware – built-in needle valve, mounting for a 2 1/2-inch post with hex bolts, and a 3/8-inch flared gas inlet.
Is the Fin match lit only?
The Fin is listed on the Original TOP Torch base, which is the match-lit configuration with a built-in needle valve for precise flame control – a simple system with nothing electronic to maintain. If your project needs switch-fired ignition, contact us and we will confirm current options for the Fin.
Can I combine Fin torches with water features?
That contrast is exactly where the Fin excels – its vertical blade of flame above the horizontal sheet of a scupper or bowl. Run Fins behind water bowls on a raised pool wall and you get fire and water in one composition, each making the other look better.
How is the Fin installed?
Like every TOP torch: bolt the Fin to any 2 1/2-inch post with hex bolts, connect gas at the 3/8-inch flared inlet, and let a licensed installer handle the fuel run. Its slim profile suits steel posts especially well, typically set 6 to 8 feet high.
How does the Fin behave in wind?
The tall flame will lean and flicker with a breeze, which animates the blade shape dramatically. In steadier wind, pull the Fin’s needle valve down so the flame rides close to the burner, position posts out of the worst gusts, and shut down entirely during storms.
Does rain damage the Fin torch head?
No – the Fin’s stainless steel is selected for permanent outdoor duty, through rain, sun, and freeze-thaw seasons. Turn the gas off when weather rolls in, since a downpour can snuff the flame, and relight once the sky clears. A cover is optional, not required.