
Square Fire Table Form, 16 inches tall: a low square shell with a usable ledge
The Outdoor Plus Square Fire Table Form is a 16-inch-tall, ready-to-finish square shell. Its wide ledge overhangs a shorter base, leaving drink space. Choose 36, 48, 60, 72, or 84 inches. Finish raw hardie board with patio-matching stone, tile, or stucco.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. The stainless pan, burner, key valve, hoses, and air vent are inside; a bullet burner upgrade, cover, stainless lid, glass wind guard, fire glass, and burner ornaments are optional. Dining chairs? Try the 24-inch Square Fire Table Form, taller with room to hide a propane tank. The Square fire table form ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
All Ready To Finish Forms come in a raw hardy board finish.
All units Include: a Stainless Steel Drop-In Pan, Burner, Key Valve, Whistle-Free Hoses, and a Stainless Steel Air Vent.
| Size |
36″(16″-Tall), 36″(24″-Tall), 48″(16″-Tall), 48″(24″-Tall), 60″(24″-Tall), 60″(16″-Tall), 72″(24″-Tall), 72″(16″-Tall), 84″(16″-Tall), 84″(24″-Tall) |
| Ignition Type |
Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
| Gas Type |
Liquid Propane, Natural Gas |
SKU : OPT-ST36PB | OPT-ST48PB | OPT-ST60PB | OPT-ST72PB | OPT-ST84PB
FAQ
What exactly is the Square Fire Table Form?
The build-it-your-way answer to a square fire table: an engineered hardie board shell, 16 inches tall, with the complete gas system inside and room around the flame for a finished ledge. Veneer it to match your hardscape and it reads as bespoke masonry at a fraction of the design effort.
What comes included with the Square Table Form?
Per the spec tab: a stainless steel drop-in pan, burner, key valve, whistle-free hoses, and a stainless steel air vent — the entire working fire system. The shell arrives raw on purpose, ready for tile, stone, stucco, or brick.
Which sizes does the spec list?
Square footprints from 36 to 84 inches; the tab lists both 16- and 24-inch-tall entries across that range, with this listing covering the 16-inch-tall builds. Confirm your exact footprint and height combination with us or the linked spec sheet when ordering.
How is a fire table form different from a fire pit form?
Usable surface: the Square Table Form is proportioned so the finished top offers ledge space around the burner for drinks and plates, where pit forms put the flame closer to the perimeter. If the piece should behave like furniture, choose the table version.
What fuel and ignition choices does the 16-inch Form offer?
Liquid propane or natural gas, factory-set at order, with ignition from Match Lit and Match Lit with Flame Sense (LC certified) through Flame Sense with Spark, Low Voltage Electronic, and Plug and Play (both CSA certified). Guests-will-use-it installs favor the electronic end.
Is this really easier than building a fire table from scratch?
By an order of magnitude — the parts that sink DIY builds (burner sizing, air supply, hose routing that does not whistle) are engineered into the Square Table Form before it ships. Your team does the visible craftsmanship; the fire science is already finished.
Can the finished table sit on my outdoor rug?
Set the built table on hard surface — pavers, concrete, stone — and keep rugs a few feet from the flame zone. A 16-inch-tall square build radiates heat low and wide. For finished-product alternatives, browse our fire pit table lineup.