
Rectangle Fire Table Form, 24 inches tall: a shell for a dining-height fire table
The Outdoor Plus Rectangle Fire Table Form is a 24-inch-tall, dining-height rectangular shell in raw gray hardie board. Six lengths span 48 to 108 inches, all 30 inches deep. Its slab top overhangs a narrower base, leaving a ledge for stone, tile, or stucco. An end door hides a propane tank.
Order it for natural gas or propane. Light it with a match, or add electronic ignition and start it with a button. The stainless pan, burner, key valve, hoses, and air vent are inside; a bullet burner upgrade, cover, stainless lid, glass wind guard, fire glass, and burner ornaments are optional. Sofa seating? Try the lower 16-inch Rectangle Fire Table Form. The Rectangle fire table form ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Specifications
” target=”_blank”]
[/col]
All Ready To Finish Forms come in a raw hardy board finish.
All units Include: a Stainless Steel Drop-In Pan, Burner, Key Valve, Whistle-Free Hoses, and a Stainless Steel Air Vent.
| Size |
48″ x 30″(16″-Tall), 48″ x 30″(24″-Tall), 60″x30″(24″-Tall), 60″ x 30″(16″-Tall), 72″ x 30″(16″-Tall), 72″x30″(24″-Tall), 84″ x 30″(24″-Tall), 84″x30″(16″-Tall), 96″ x 30″(24″-Tall), 96″ x 36″(16″ -Tall), 108″ x 30″ (16″-Tall), 108″ x 30″ (24″-Tall) |
| Ignition Type |
Match Lit Ignition, Match Lit with Flame Sense Ignition (LC Certified), Flame Sense With Spark Ignition, Low Voltage Electronic Ignition (CSA Certified), Plug and Play (CSA Certified) |
| Gas Type |
Liquid Propane, Natural Gas |
SKU : OPT-URST48DRPB | OPT-URST60DRPB | OPT-URST72DRPB | OPT-URST84DRPB | OPT-URST96DRPB | OPT-URST108DRPB
FAQ
What makes the 24-inch Rectangle Fire Table Form the entertainer’s pick?
True table height: at 24 inches tall with a 30-inch-deep top, the finished piece works like an outdoor coffee-table-meets-bar — drinks on the ledge, flame in the center, guests standing or seated around it. It is the most furniture-like of the Ready to Finish rectangle forms.
Which footprints does it come in?
Lengths from 48 through 108 inches at 30 inches deep, matching the 16-inch table sibling but standing 24 inches tall. The longest versions of this Rectangle Table Form suit commercial patios where guests gather on all sides.
Is the fire system included or separate?
Included, complete: stainless steel drop-in pan, burner, key valve, whistle-free hoses, and stainless steel air vent, sized to the form. The only unfinished element is the raw hardie board shell — which is the entire creative opportunity.
Why choose this over the 16-inch-tall table form?
Posture and presence: 24 inches suits dining chairs, standing mingling, and bar-adjacent layouts, while 16 inches leans lounge-and-sofa. If people will eat or set drinks while standing, the taller Rectangle Table Form earns its extra height every evening.
When do I decide between propane and natural gas?
At order — each form is factory-configured for liquid propane or natural gas, with ignition options through Plug and Play (CSA certified). Coordinate with your gas fitter first: NG needs a plumbed stub at the site, LP needs a tank plan.
What will it cost to run?
Driven by flame height and burner length: a long Rectangle Table burner run low is surprisingly economical for ambiance, while full flame on a 108-inch unit is a genuine heater with the fuel bill to match. Natural gas installs make heavy use painless.
Is weather a concern for the finished table?
No — stainless internals plus masonry veneer are made for year-round outdoor duty. Dry the pan after storms before lighting, cover the media between uses, and the finished piece will outlast most furniture. See our fire pit table category for finished comparisons.