SimpliFire 32 Inch Electric Insert: the plug-in insert for an old wood fireplace
The SimpliFire 32 Inch Electric Insert is a plug-in electric fireplace insert for an old wood fireplace opening or a new framed opening. It is the widest of the SimpliFire inserts and the simplest to run. The glass is 27-3/8 inches wide and 16 inches tall, with a log set over glowing embers on a brick-look back wall. The insert slides into the opening you already have and its own trim finishes the edge in a framed opening. In a wood fireplace, a small or large surround covers the gap around it. The opening needs to be at least 29-1/8 inches wide at the front, 24 inches at the back, 19-3/4 inches high and 8-3/4 inches deep. Measure yours against the spec tab.
It needs no gas line and no chimney. It comes with a 6 foot cord and a grounded plug for a 120 volt, 15 amp outlet. It gives 5,000 BTU of heat on a low or high setting with a thermostat, enough to take the chill off the room, and the five flame effects run with or without heat. In the box you get the insert, the front, the remote and its battery. You can add a small or large surround on the page. Want a door-style front or a different width? See the SimpliFire Electric Insert in 25, 30 and 35 inches. Building a new fireplace wall? See the SimpliFire Built-In electric fireplace. The SimpliFire 32 Inch Electric Insert ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Features
Flexible Installation
Install into a wood fireplace opening with an optional surround or into a framed opening with the included trim piece.
Plug-In Ready
Ships with a 6 foot power cord and a grounded plug for a 120 volt, 15 amp outlet.
Multifunction Remote
Flame, heat and thermostat control from the remote or the buttons on the insert.
Adjustable Heat
Enjoy year-round with or without heat.
FAQ
Will the 32 inch insert fit my existing fireplace?
The owner’s manual gives the minimum opening as 29-1/8 inches wide at the front, 24 inches wide at the back, 19-3/4 inches high and 8-3/4 inches deep. The insert itself is 30-3/4 inches wide, 19 inches high and 8 inches deep, and its included front measures 31-7/16 by 20-9/16 inches, so it overlaps the opening’s edge. Measure all four figures before you order.
Does it plug in, or does it have to be hardwired?
It plugs in. The insert ships with a power cord about 6 feet long on its right side and a grounded three-prong plug for a 120 volt, 15 amp circuit. The manual says to avoid extension cords, and in a bathroom the outlet must be GFI protected.
Do I need a surround?
Only for a wood fireplace opening, where the surround covers the gap between the insert and the masonry. Two sizes are offered on this page, a small one 36-1/2 inches wide and a large one 42-1/2 inches wide, each usable three-sided or four-sided with a removable bottom piece. In a framed opening the included trim finishes the edge on its own.
How much heat does it give, and can I run the flames without heat?
It is rated at 5,000 BTU with a 1,500 watt heater, enough to take the chill off a room rather than replace a furnace. The heater has low and high settings and a 9 step thermostat, and the heat button cycles to off, so the five flame effects can run on their own year-round.
What is in the box?
The insert, its front, the owner’s manual, the remote with a CR2032 battery, and four construction screws. Surrounds are sold separately on this page.
Can I keep a mantel above it?
Yes, within the manual’s limits. With no surround, a mantel projecting up to 18 inches may sit at least 1 inch above the top of the front so the front can still be removed. With a surround, the mantel and wall finish must not overlap the surround, so the insert stays removable for service. Browse other styles in our electric fireplace inserts collection.