SimpliFire Built-In: a traditional wood fire look without a chimney
The SimpliFire Built-In is a traditional style electric fireplace for your wall. It comes in two widths from 30 to 36 inches. Pick the size on the page. Inside, it has a stonework look, textured logs, and flames you can raise or lower. Built in means your builder frames it into the wall and runs tile, stone, or drywall right up to the edge, with no vents or screen showing.
It needs no gas line and no chimney. Plug it into a wall outlet on its own circuit for 4,800 BTU, enough to take the chill off the room. Have an electrician hardwire it on a heavier circuit for 10,000 BTU, about twice the heat. Run the flames with or without heat. It comes with a remote. In the box you get the log set and the remote. You can add a black front to frame the opening instead of finishing to the edge. Replacing an existing fireplace? See the SimpliFire Electric Insert. The SimpliFire Built-In ships free from My Cozy Outdoors with No Sales Tax (except WY) and the full manufacturer warranty.
Features
Built-In, Flush Design
Bring finishing materials up to the edge in a clean look with no visible heat vents or mesh screen.
Multifunction Remote
Thermostat, lighting, on/off control at your fingertips
Adjustable Heat
Enjoy year-round with or without heat.
Specifications
SKU: SF-BI30-EB | SF-BI36-EB
| Model |
30″ Built-in Electric Fireplace |
36″ Built-in Electric Fireplace |
| Unit Width |
31″ |
37″ |
| Unit Depth |
11-3/4″ |
11-3/4″ |
| Unit Height |
26-3/4″ |
31-7/32″ |
| Framing Width |
31-3/4″ |
38″ |
| Framing Depth |
11-5/8″ |
11-5/8″ |
| Framing Height |
120V = 27-1/4″, 240V = 31-1/2″ |
120V = 31-1/2″, 240V = 33-1/2″ |
| BTU/hr Input |
120V = 4,800; 240V = 10,000 |
120V = 4,800; 240V = 10,000 |
FAQ
What changes if I wire the Built-In for 240 V instead of 120 V?
Heat and framing height. The Specifications tab lists 4,800 BTU/hr on 120 V and 10,000 BTU/hr on 240 V, and the framing height rises from 27-1/4 to 31-1/2 inches on the 30 (31-1/2 to 33-1/2 on the 36) because the manual requires a 2-inch clearance above the unit when hard-wired for 240 V. Decide the voltage before framing.
Can it plug into an outlet?
Yes at 120 V. The installation manual says the unit is designed to be hard-wired for 120 V or 240 V and that a plug-in kit is supplied for use with a grounded 120 V receptacle. A minimum 15 amp circuit is required for either voltage, and a dedicated circuit is recommended. The units are tested compatible with AFCI and GFCI breakers.
Do I need the Black Front, or can I finish right to the edge?
The front is optional. The Features tab describes a built-in, flush design that lets you bring finishing materials up to the edge with no visible heat vents or mesh screen. If you prefer a framed look, the Black Front 30 or Black Front 36 appears on the selector once you choose a size, with its price shown there.
What size rough opening does it need?
For the 30-inch model the Specifications tab lists a framing width of 31-3/4 inches and depth of 11-5/8 inches; the 36 needs 38 inches wide and the same depth. Framing height depends on voltage, 27-1/4 or 31-1/2 inches for the 30 and 31-1/2 or 33-1/2 for the 36. The architect guides in the Manuals tab carry the full drawings.
Is this a traditional-looking electric fireplace?
Yes. Rather than a linear ribbon of flame, the Built-In has a masonry-style interior, a textured log set and adjustable flame height, so it reads like a classic wood fireplace at the press of a button. It is offered in 30 and 36-inch widths and controlled with the included multifunction remote for thermostat, lighting and on/off.
Can I use it in an outdoor room?
No. The installation manual states not to use this unit outdoors, and it is listed as an indoor fireplace. For a covered patio look at the Forum outdoor model instead, and for other indoor styles browse our electric fireplace collection.